Bedienungsanleitung Primafoon Jan des Bouvrie (Seite 1 von 2) (Holländisch)

98149

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

2-590-636-11 (1)

Printed on 100% recycled paper using VOC

(Volatile Organic Compound)-free vegetable

oil based ink.

continued on the reverse

Digital Still Camera

Operating Instructions

Before operating the unit, please read this manual and “User’s Guide/Troubleshooting” (separate

volume) thoroughly, and retain it for future reference.

Refer to “User’s Guide/Troubleshooting”

(separate volume)

Explains advanced techniques and what to do if you experience trouble with

your camera.

Read This Firs

DSC-S60/S80/ST80/S9

http://www.sony.net/

Checking the accessories supplied

• Ni-MH battery charger BC-CS2A/CS2B (1)

Power cord (mains lead) (1) (DSC-S90/S80)

• Cyber-shot Station (DSC-ST80)

–Cyber-shot Station CSS-SA (1)

–A/V connecting cable (1)

–USB cable (1)

– AC Adaptor AC-LS5 (1)

– Power cord (mains lead) (1)

–Rechargeable battery pack (NP-

NH25) (1)

–Operating Instructions “Cyber-

shot Station” (1)

• USB, A/V cable for multi-use terminal (1) (DSC-S90/S80/S60)

• HR6 (size AA) Nickel-Metal

Hydride batteries (2) (DSC-S90/S80)

R6 (size AA) alkaline batteries (2) (DSC-S60)

A “Memory Stick” is not

supplied.

The camera has the own internal

memory (32 MB), however,

purchase of a “Memory Stick” is

recommended.

• Wrist strap (1) • CD-ROM (Cyber-shot application

software) (1)

• Operating instructions for digital still

camera “Read This First” (this manual) (1)

• Operating instructions “User’s Guide/

Troubleshooting” (1)

Notes before use

• Charge the supplied batteries before using the camera for the first time. (DSC-S90/S80/ST80 only)

• The camera is a precision instrument. Be careful not to bump the lens or the LCD screen, and not to

apply force to it. Attach the strap to prevent the camera from damage by being dropped, etc.

Additional information on this product and answers to frequently asked questions can be

found at our Customer Support Website.

• Battery case (1)

(DSC-S90/S80)

Hook

Prepare the battery

For DSC-ST80, refer to the operating instructions “Cyber-shot Station”.

• Connect the battery charger to an easily accessible wall outlet (wall socket) close by.

• Even if the CHARGE lamp is not lit, the battery charger is not disconnected from the AC power

source (mains) as long as it is connected to the wall outlet (wall socket). If some trouble occurs

while using the battery charger, immediately shut off the power by disconnecting the plug from

the wall outlet (wall socket).

• When charging is finished, disconnect the power cord (mains lead) from the wall outlet (wall

socket), and remove the Nickel-Metal Hydride batteries from the battery charger.

• Time required to charge fully depleted Nickel-Metal Hydride batteries at a temperature of 25°C

(77°F). Charging may take longer under certain circumstances or conditions.

• The CHARGE lamp may remain lit longer than six hours, but this is not a malfunction.

Nickel-Metal Hydride battery Charging time

NH-AA-DA×2 (supplied with DSC-S90/S80) Approx. 6 hours

Battery charger

2 Connect the power code

(mains lead).

3 To wall outlet

(wall socket)

Power cord

(mains lead)

1 Insert the batteries.

CHARGE lamp

Light on: Charging

Light off: Completed (Remove the batteries.)

Match 3/# and

insert.

DSC-S90/S80 only

Available batteries

You can use HR 15/51:HR6 (size AA) Nickel-Metal Hydride batteries/R6 (size AA) alkaline

batteries/battery pack NP-NH25/ZR6 (size AA) Oxy Nickel Primary Battery. t “User’s

Guide/Troubleshooting” (page 93)

Using the AC Adaptor

You can connect the camera using the AC-LS5K AC Adaptor (not supplied). t “User’s Guide/

Troubleshooting” (page 15). Refer to the operating instructions supplied with the AC Adaptor.

To check the remaining battery time

Press POWER to turn on and check the time on the LCD screen.

To remove the batteries

Hold the camera with the battery cover facing upward, then open the battery cover and remove

the batteries. Be careful not to drop the batteries.

To use your camera abroad — Power sources

You can use your camera, the battery charger (supplied with DSC-S90/S80), and the AC Adaptor

(not supplied) in any country or region where the power supply is within 100 V to 240 V AC, 50/

60 Hz. Use a commercially available AC plug adaptor [a], if necessary, depending on the design

of the wall outlet (wall socket) [b].

Battery

remaining

indicator

Battery

remaining

guidelines

Sufficient

power

remaining

Battery half full Battery low,

recording/

playback will

stop soon.

Change the batteries with

fully charged ones, or

charge the batteries. (The

warning indicator flashes.)

• The displayed time remaining may not be correct under certain circumstances.

• When using alkaline batteries/Oxy Nickel Primary Battery, the battery remaining indicator may not display

the correct information.

• When the AC Adaptor (not supplied) is used, the battery remaining indicator is not displayed.

• Do not use an electronic transformer (travel converter), as

this may cause a malfunction.

BC-CS2A/

CS2B/AC-LS5

Turn the camera on/set the clock

1 Select . 2 Press POWER.

POWER

2005

1 1

12 00

Cancel

Clock Set

D/M/Y

M/D/Y

Y/M/D

Lighting

3 Set the clock with the control button.

1 Select the date display format with v/V, then press z.

2 Select each item with b/B and set the numeric value with

v/V, then press z.

3 Select [OK] with B, then press z.

• To cancel, select [Cancel] and press z.

2005

1 1

12 00

Cancel

Clock Set

D/M/Y

M/D/Y

Y/M/D

2005

1 1

12 00

Cancel

Clock Set

D/M/Y

M/D/Y

Y/M/D

2005

1 1

10 30

Cancel

Clock Set

D/M/Y

M/D/Y

Y/M/D

To change the date and time

Select [Clock Set] in the (Setup) screen and perform the procedure in step 3 above.

t “User’s Guide/Troubleshooting” (page 55)

On the clock display

• If you selected [D/M/Y] in step 3-1, set the time on a 24-hour cycle.

• Midnight is indicated as 12:00 AM, and noon as 12:00 PM.

When turning on the power

• Unless you set the clock, the Clock Set screen appears each time the camera is turned on.

• Do not touch the lens portion as the cover opens and the lens portion extends. Also, do not leave the camera

with the lens portion extended for a long period of time with the power off as this may cause a malfunction.

• The following screen appears when the camera is turned on for the second time or afterwards.

To turn off the power

Press POWER again.

• If the camera is running on battery power and you do not operate the camera for a period of time, the camera

turns off automatically to prevent wearing down the battery (Auto power-off function).

Changing the language setting

You can change the screen display to show messages in a specified language. To change the

language setting, press MENU to display the menu screen. Select (Setup) with the control

button, then, select [ Language] in (Setup1), and select the desired language. t “User’s

Guide/Troubleshooting” (page 53)

VGA

S AF

Insert a “Memory Stick” (not supplied)

Select the image size for use

Insert the “Memory Stick” all the way in until it clicks.

When there is no “Memory Stick” inserted

The camera records/plays back images using the internal memory (32 MB). t “User’s Guide/

Troubleshooting” (page 23)

Terminal side

2 Press (Image Size).

3 Select the size with v/V.

• The screen above is for still images.

For movies, select [640(Fine)] (“Memory Stick

PRO” only), [640(Standard)] or [160].

4 Press (Image Size) to

complete the setting.

VGA(E-Mail)

3:2

Image Size

1 Select a mode.

Still image:

Select .

Movie:

Select .

button

On still image sizes

For details on the image size t “User’s Guide/Troubleshooting” (page 13)

*Images are recorded in the same 3:2 aspect ratio as photograph printer paper or postcards, etc.

On recordable number of still images and recordable time of movies

Recordable number of still images and recordable time of movies vary depending on the image

size selected.

For details on recordable number or time t “User’s Guide/Troubleshooting” (page 22)

• Number of recordable images and time can differ according to shooting conditions.

To remove a “Memory Stick”

When the access lamp is lit

Never open the cover or turn off the power. The data may be corrupted.

Image size Guidelines No. of images Printing

4M (2304×1728)

(the default setting)

For printing high density images in A4 or

A5 size

Less

Fine

Rough

3:2 (2304×1536)*

3M (2048×1536)

1M (1280×960) For printing in postcard size

For recording a larger number of images

For attaching images to e-mail or creating

web pages

VGA(E-Mail)

(640×480)

Still images Movies

Maximum recordable image Maximum recordable time

Open the cover, then push the “Memory Stick” in once.

Access

lamp

4 Insert the batteries.

Bottom

While pressing OPEN, open the

cover.

DSC-S90/S80/S60 DSC-ST80

Match 3/# and insert. Match 3/# and insert.

(, ) yp

Primafoon Jan des Bouvrie Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info