Bedienungsanleitung Princess 01 282990 01 001 (Seite 12 von 69) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

364255

Zoom out

Zoom in

Vorherige Seite

1/69

Nächste Seite

Beer Tap & Cooler Article 282990

opening in the tap unit. Press on the tap

unit until it clicks into place on the keg.

5 Push the extension pipe firmly onto the

underside of the tap unit.

6 Remove the cover from the appliance.

7 Position the keg with the tap unit in the

appliance.

8 Place the cover on the appliance.

9 Place the grille on the drip tray.

10 Position the drip tray against the

appliance. The drip tray is held in place

by two magnets.

11 Slide the supply voltage selector switch

to the required position: AC or 12 V DC.

• Use AC when you connect the appliance

to the mains supply at home.

• Use 12 V DC when you connect the

appliance to the cigarette lighter socket

in the car or caravan.

12 Connect the AC cable or the 12 V DC

cable to the associated connection on

the appliance.

13 Push the AC cable plug into the wall

socket, or plug the 12 V DC cable plug

into the cigarette lighter socket.

The indicator lamp will light to indicate

that the appliance is switched on.

Tapping

See Figure A-4.

1 Rinse a glass with clean, cold water.

2 Hold the glass at an angle just under

the tap outlet.

3 Open the tap by tilting the tap handle on

the tap unit quickly towards you.

4 Close the tap by pushing the tap on the

tap unit quickly away from you when the

beer reaches the lip of the tilted glass.

5 Place the glass on the drip tray grille.

6 Take the top of the foam off with a

spatula so that the foam head is level

with the top of the glass.

7 Leave the appliance switched on if you

want to keep the keg cooled for a longer

period.

Cooling

See Figure B-1 and C-1.

As well as tapping beer, the Princess Beer

Tap & Cooler is particularly suitable for

keeping products cold. The Princess Beer

Tap & Cooler has the capacity for:

• a maximum of 5 bottles, each with a

content of 75 cl, or

• 17 cans, each with a content of 33 cl, or

• 12 bottles, each with a content of 33 cl

and a diameter of 50 mm.

• Ensure that the products have been

cooled before you place them in the

appliance.

• Before using the appliance, check

whether the mains supply voltage

matches the voltage indicated on the

type plate of the appliance.

1 Remove the cover from the appliance.

2 Slide the sealing block into the opening

in the cover.

3 Slide the supply voltage selector switch

to the required position: AC or 12 V DC.

• Use AC when you connect the appliance

to the mains supply at home.

• Use 12 V DC when you connect the

appliance to the cigarette lighter socket

in the car or caravan.

4 Connect the AC cable or the 12 V DC

cable to the associated connection on

the appliance.

5 Push the AC cable plug into the wall

socket, or plug the 12 V DC cable plug

into the cigarette lighter socket.

The indicator lamp will light to indicate

that the appliance is switched on.

6 Place the pre-cooled products in the

appliance.

7 Place the cover on the appliance.

8 Leave the appliance switched on if you

want to keep the products cooled for a

longer period.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Princess 01 282990 01 001 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info