Bedienungsanleitung Princess 01 535596 01 001 (Seite 7 von 40) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

401413

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Step 3. Side of the head

Use the shorter settings of comb attachment for cutting the sideboards - the hair directly in front of the

ears. After that, adjust the comb attachment to a longer length and continue cutting to the top of the head.

Step 4 Top of the head

Use comb attachment to cut the hair on the top of the head from back to front against the direction of

growth of the hair. In some cases you may have to work from front to back. The comb attachment is to

make short, cropped hair. If you want to keep the hair on top of the head longer, you must use a comb to

keep the hair above the head. Cut with the clippers above the comb, or hold the hair between the fingers

and cut it off at the desired length. Always work from the back of the head. Gradually cut the hair shorter

by reducing the distance between the comb, or the fingers, and the head. Use the comb regularly to check

whether there are any uneven locks and to comb out cut-off hair.

Step 5 The finishing touch

Finally, for a good, accurately finished cut, remove the comb again and turn the clippers over (with the

bottom side up), so that you can touch up the bottom of the neck area, the sides and the area around the

ears. Put the adjustable cutting length button onto the lowest setting. Hold the clippers at a right angle to

the head, with the points of the cutting blade lightly touching the skin, and work in a downward direction.

This will produce just as smooth a result as if you had used a razor-blade.

Cutting longer hair

If you want the hair tapered, then first part and comb the hair as usual. Now divide the hair on the head

from behind into three equal parts around the head. Fix the two upper layers with pins, so that they will

not be in the way when you cut the lowest layer. After that, proceed to cutting with a pair of scissors or

with the help of the clippers in combination with the styling comb.

Thinning out your hair/beard

First attach comb attachment to the clipper and set the desired hair length, then slide the thinning regulating

button on the front side of the clipper to the left. Then you can cut your hair/beard thin.

CLEANING AND MAINTENANCE

After each use remove hair clippings with the cleaning brush.

You can clean the outside of the clippers with a soft, damp cloth.

The shaving head can be detached from the clipper. Clean the shaving head by rinsing it under a water tap.

However, the clipper unit and adaptor can’t be immersed in water.

How to remove the shaving head

Press the shaving head with your thumb towards the back and remove it.

Reinsert the shaving head by inserting the clip of the shaving head into the groove of the casing, and

press the shaving head back into the casing until it clicks

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Princess 01 535596 01 001 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info