The temperature indicator (2) goes off
when the grill plate (3) has reached the
required temperature.
While the appliance is switched on, the •
temperature indicator (2) will illuminate
and extinguish as the thermostat switches
the heating elements on and off to
maintain the required temperature.
To switch off the appliance, turn the •
thermostat dial (1) fully to the right.
Remove the mains plug from the wall socket.•
Setting the temperature (fig. A)
Turn the thermostat dial (1) to the left to •
increase the temperature of the grill
plate (3).
Turn the thermostat dial (1) to the right •
to decrease the temperature of the grill
plate (3).
Hints for optimum use
Before you proceed, we would like you to
focus your attention on the following notes:
- Do not use the appliance when the mains
cable is located in the cable storage.
Prepare the ingredients.•
Clean the grill plate with a damp cloth.•
Place the appliance on a stable and flat •
surface.
Insert the mains plug into the wall socket.•
Turn the thermostat dial to set the •
required temperature.
Wait for approximately 10 minutes until •
the grill plate has reached the required
temperature.
Note: Small pieces will grill or fry better •
and more quickly than large pieces.
Set the thermostat to suit the ingredients. •
Experiment with the required cooking time
and the required temperature to achieve
the best results.
After use, switch off the appliance, remove •
the mains plug from the wall socket and
wait until the appliance has cooled down.
Defrosting
Before you proceed, we would like you to
focus your attention on the following notes:
- Do not use the heating elements of the
appliance for defrosting food.
If you use the heating elements for
defrosting food, the food is slowly cooked
instead of merely defrosted.
In order to defrost food, put the food on the
grill plate. Make sure that the mains plug is
not inserted into the wall socket. Defrosting
food on the grill plate is considerably faster
than defrosting food on, for example, a
ceramic or plastic dish.
Cleaning and maintenance
Before you proceed, we need you to pay
attention to the following notes:
- Before cleaning or maintenance, remove
the mains plug from the wall socket and
wait until the appliance has cooled down.
- Do not immerse the appliance in water or
any other liquids.
Before you proceed, we would like you to
focus your attention on the following notes:
- Do not use aggressive or abrasive cleaning
agents to clean the appliance.
- Do not use sharp objects to clean the
appliance.
Regularly check the appliance for possible •
damage.
Clean the grill plate after each use:•
- Remove any residues with a paper towel.
- Clean the grill plate with a damp cloth.
- Thoroughly dry the grill plate.
Clean the outside of the appliance with •
a damp cloth. Dry the outside of the
appliance with a clean, dry cloth.
Put the mains cable in the cable storage at •
the underside of the appliance.
After cleaning, put the appliance in the •
original packaging.
Store the appliance in a dry place, out of •
the reach of children.
U.K. Wiring instructions
The wires in the mains lead are coloured in
accordance with the following code:
BLUE NEUTRAL
BROWN LIVE
GREEN/YELLOW EARTH
