To switch on the appliance with continuous
low speed, set the on/off switch (1) to the ‘I‘
position.
To switch on the appliance with continuous
high speed, set the on/off switch (1) to the
‘II‘ position.
To switch on the appliance in pulse mode,
set the on/off switch (1) to the ‘P‘ position.
To switch off the appliance, set the on/off
switch (1) to the ‘O‘ position.
Hints for optimum use
Cut the fruit and/or vegetables into pieces.
Make sure that the pieces of fruit and/or
vegetables fit in the jar.
Remove the jar lid from the jar.
Put the pieces of fruit and/or vegetables
into the jar.
Mount the jar lid onto the jar.
Mount the jar lid insert into the jar lid.
Insert the mains plug into the wall socket.
Switch on the appliance by setting the on/
off switch to the required position. The
appliance chops the pieces of fruit and/or
vegetables in a few seconds. The longer
the appliance is switched on, the finer the
pieces of fruit and/or vegetables will be
chopped.
If necessary, add more pieces of fruit and/
or vegetables:
- Turn the jar lid insert counterclockwise to
remove the jar lid insert from the jar lid.
- If the pieces are too large for the filling
opening of the jar lid, switch off the
appliance, remove the jar lid, and add
the pieces of fruit and/or vegetables.
- Mount the jar lid onto the jar.
- Mount the jar lid insert into the jar lid.
Switch on the appliance by setting the on/
off switch to the required position. The
appliance chops the pieces of fruit and/or
vegetables in a few seconds. The longer
the appliance is switched on, the finer the
pieces of fruit and/or vegetables will be
chopped.
After use, switch off the appliance and
remove the mains plug from the wall
socket.
Description (fig. A)
Your 212524 Princess blender has been
designed for the following applications:
- chopping and mashing fruits and
vegetables,
- preparing smoothies, shakes and juices,
- preparing cold soups,
- preparing dressings, dips and sauces.
The appliance is suitable for domestic use
only.
1. On/off switch
2. Jar
3. Jar lid
4. Jar lid insert
5. Blade
Package contents
Blender
Jar
Jar lid
Jar lid insert
Blade
Rubber seal ring
Plastic ring
Initial use
Preparation
Clean the appliance. Refer to „Cleaning
and maintenance“.
Assembly
Warning! Before assembly, always remove
the mains plug from the wall socket.
Mounting the jar (fig. B)
Mount the jar (2) onto the appliance.
Mount the jar lid (3) onto the jar (2).
Mount the jar lid insert (4) into the jar lid (3).
Switching on and off (fig. C)
Warning!
Do not switch on the appliance when the
jar is empty (fig. D).
Do not leave the appliance switched on
continuously for more than three minutes.
