Bedienungsanleitung Princess 242151 (Seite 14 von 61) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

441613

Zoom out

Zoom in

Vorherige Seite

1/61

Nächste Seite

ENGLISHENGLISH

• 27 •• 26 •

Repairing / Maintenance

- If the coffee maker falls and you see or suspect

damages or malfunctions, immediately

remove the plug from the wall. Never use faulty

machines.

- Repairs must be made by authorized service

centres only.

- If authorized service centres do not carry out

maintenance work and/or repairs, the

manufacturer is not liable for any damages.

Fire Fighting

- In the event of a fire, use carbon dioxide

extinguishers (CO

). Do not use water or

powder extinguishers.

DESCRIPTION OF PARTS

See Fig.01

1 Coffee bean container

2 Coffee bean container cover

(aroma preserver)

3 Grinding control knob

4 Dose control knob

5 Ground coffee doser cover

6 Drip plate for placing coffee cups

7 ON-OFF switch

8 Water tank cover

9 Water tank

10 Coffee grounds drawer

11 Power cord

12 Drip tray + plate

13 Height adjustable coffee dispenser

14 Steam / hot water nozzle and pipe

15 Front cover

16 Steam knob

17 Coffee dispenser

18 Control panel

19 Key of coffee dispenser

20 Cleaning brush

21 Ground coffee measuring spoon

Control panel

22 Ground coffee button /LED

23 Espresso coffee button / temperature-ready

LED

24 Weak coffee button / temperature-ready

LED

25 Steam button / LED

26 Descale button / LED

27 Water warning light

28 No ground coffee warning light / full coffee

grounds drawer warning light

29 Malfunction warning light

30 Full tray warning light

4 INSTALLING THE COFFEE

MAKER

For your safety and the safety of third

parties, follow the “Safety Standards” (see

chapter 3).

4.1 Packaging

The original packaging was designed and made

to protect the appliance during shipment.

We recommend you keep it for future needs.

4.2 Preliminaries

•Remove the coffee maker from the

packaging and position it in a suitable

location that meets the requirements

specified and described in the safety

standards (chap.3).

• Open the machine door, take the drip tray

(12) from the package, and fit the dregs box

(10); then, fit the drip tray in the machine

(Fig.21).

• Make sure that the drip tray and plate

(Fig.01, pos. 12), the coffee grounds drawer

(10) and the coffee dispenser (17) are fitted

correctly and that the front cover (15) is

closed.

• Keep the cleaning brush (20) and the key of

the coffee dispenser (19) handy, which were

supplied with the appliance.

If the red light (29) is still on when the machine

is started, it means that one of the parts

described above is positioned incorrectly.

Caution: You must read chapter 15.

This chapter explains in detail the

meaning of all the visual signals displayed

to the user through the lights (LEDs) found

on the control panel.

4.3 Preparing the coffee maker for use

• Open the water tank cover (Fig.02) and

remove the tank (Fig.03). Rinse and fill with

fresh potable water (Fig.04); we recommend

that you do not exceed the “MAX” level mark.

Replace the water tank in its housing and

reposition the cover on top.

Always fill the tank (9) with fresh still

water. Hot water and other liquids can

damage the tank and/or the appliance. Do

not operate the appliance without water:

make sure that there is enough water inside

the tank.

• Lift the cover (Fig.05) and fill the container

with coffee beans (Fig.06).

Use coffee beans only. Ground and

instant coffee, as well as other items,

cause damage to the appliance.

• Close the cover of the coffee bean container

(1).

• Insert the plug into the outlet at the back of

the coffee maker (Fig.07) after making sure

that the ON/OFF switch (7) is in the “O”

position.

• Insert the other end of the plug into a suitable

wall outlet.

• When not in use, the ON/OFF switch of the

appliance is in the “O” position. To switch ON

the coffee maker, simply press the switch

(Fig.08). The LEDs (23) and (24) start flashing

on the control panel.

• To fill the circuit, direct the steam/hot water

nozzle (Fig.01, item 14) towards the drip tray,

place a cup or suitable vessel under the steam

nozzle and turn the knob anticlockwise

(Fig.09). Wait for water to flow regularly from

the nozzle and, then, shut off the flow by

turning the knob clockwise.

Note: You must fill the circuit of the

appliance if the machine is switched

ON for the first time, the machine has not

been used for a long time, the water tank

has been emptied completely or the warning

light (27) flashes.

• After switching ON the appliance, LEDs (23)

and (24) flash simultaneously during the

heating phase. Once the heating phase is

finished, LEDs (23) and (24) emit a fixed light.

• At this point, your coffee maker is ready for use.

• Follow the instructions below to dispense

coffee, hot water or steam and use the

appliance correctly.

Gaggia-OEM1-cod 165892100 rev.01.PMD 06/06/2002, 20.3126-27

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Princess 242151 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info