Note: The steam generator is protected with a
safety valve. The cover can only be removed
from the water reservoir when the pressure is
below 1 bar.
Switch off the steam generator (4) using
the on/off switch (5).
Switch off the iron (1) using the on/off
switch (2).
Remove the mains plug from the wall socket.
Allow the appliance to cool down completely.
If necessary, press the steam button (9) to
decrease the pressure in the water reservoir
more rapidly.
If the pressure has lowered sufficiently,
reservoir (13).
Fill the water reservoir (13) with the
indicated amount of water.
Refer to ”Filling the water reservoir”.
(12).
Hints for use
Dry ironing
Fill the water reservoir (13) with water.
Place the iron (1) with the soleplate (15)
onto the iron holder (16).
Insert the mains plug into the wall socket.
Switch on the iron (1) using the on/off
switch (2). The on/off indicator (3) comes on.
The iron starts heating.
Set the temperature using the temperature
the soleplate (15) has reached the required
temperature. The iron is ready for use.
If you interrupt the process, place the iron
(1) with the soleplate (15) onto the iron
holder (16).
After use, place the iron (1) with the
soleplate (15) onto the iron holder (16).
Switch off the steam generator (4) using
the on/off switch (5).
Switch off the iron (1) using the on/off
switch (2).
Remove the mains plug from the wall socket.
Allow the appliance to cool down completely.
Setting the temperature
(fig. A, C & D)
The temperature must be set according to the
type of fabric.
Warning! Always turn the temperature control
dial to the ’min’ position before inserting the
mains plug into the wall socket or removing
the mains plug from the wall socket.
clockwise to increase the temperature.
during the process. The temperature
(15) has reached the required temperature.
counterclockwise to decrease the
remains on during the process.
when the soleplate (15) has reached the
required temperature.
Label Type of fabric Temperature
(fig. D) (fig. C)
A The fabric must not be ironed.
B Synthetic (acryl, modacrylic,
polypropylene, polyurethane) A
C Synthetic (acetate, triacetate) B
C Synthetic (metal, nylon,
polyester, viscose) B
C Silk B
C Wool C (dry ironing /
steam ironing)
C Cotton C (dry ironing /
steam ironing)
D Linen C (dry ironing /
steam ironing)
”Water reservoir empty” indicator
(fig. A)
If the water level in the water reservoir (13) is
too low, the ”water reservoir empty” indicator
(11) will come on to indicate that the water
reservoir must be refilled.
