Shortly press the spray button (5) for •
a vaporised spray.
Keep the spray button (5) pressed for •
a dense spray.
Note: For delicate fabrics, moisten the fabric
using the spray function before use or put a
damp cloth between the soleplate and the
fabric. Do not use the spray function on silk or
synthetic fabrics in order to prevent staining.
Steam shot function (fig. A)
For steam ironing, the steam shot button can
be used to supply a shot of steam that can
penetrate the fabric and remove the most
stubborn creases.
Before you proceed, we would like you to
focus your attention on the following notes:
- Do not use the steam shot function for dry
ironing.
Press the steam shot button (4) once to •
supply a shot of steam.
Press the steam shot button (4) at intervals to •
iron vertically (curtains, hung garments, etc.).
Note: The steam shot function can only be used
at high temperatures. Do not use the steam
shot function when the temperature indicator
comes on. Only use the steam shot function
again when the temperature indicator goes off.
Ironing tips
Start ironing with a low temperature to •
reduce the ironing time and eliminate the
risk of scorching the fabric.
It is recommended to use low temperatures •
for fabrics that have unusual finishes
(sequins, embroidery, etc.).
If the fabric is mixed (e.g. 40% cotton, •
60% synthetic), choose the temperature for
the fabric requiring the lowest temperature.
If you do not know the composition of the •
fabric, determine the temperature by
testing on a hidden corner of the fabric.
Start ironing with a low temperature and
gradually increase the temperature.
If the fabric is not completely dry, the ironing •
process will become smoother. Always iron
silk fabrics when they are damp.
Do not iron areas with traces of perspiration •
or other marks in order to prevent staining.
It is recommended to iron silk, woolen or •
synthetic fabrics inside out.
It is recommended to iron velvet fabrics in •
the direction of the fibre without exerting
pressure on the appliance.
Cleaning and maintenance
Before you proceed, we need you to pay
attention to the following notes:
- Before cleaning or maintenance, always
switch off the appliance, remove the mains
plug from the wall socket and wait until
the appliance has cooled down.
- Do not immerse the appliance in water or
any other liquids for cleaning.
Before you proceed, we would like you to
focus your attention on the following notes:
- Do not use aggressive or abrasive cleaning
agents to clean the appliance.
- Do not use sharp objects to clean the
appliance.
Regularly check the appliance for possible •
damage.
Regularly check the water reservoir for •
possible leakage.
Clean the appliance after each use:•
- Empty the water reservoir.
- Remove limescale and other contaminants
from the soleplate with a damp cloth
and a non-abrasive cleaning agent.
- Clean the housing of the iron with
a soft, damp cloth.
Descaling the appliance
The appliance must be descaled after every 25
uses. If the appliance must be descaled, use
a suitable descaling agent. Special descaling
agents are available from our service station.
Note: Princess will not be responsible for any
damage caused by descaling agents.
Damage caused by not regularly descaling the
appliance is not covered by the guarantee.
