Bedienungsanleitung Princess 332935 Red Viper Cyclone Vacuum Cleaner (Seite 13 von 76) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

491622

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Assembly

Warning!

- Before assembly, always switch off the

appliance and remove the mains plug from

the wall socket.

Mounting and removing the dust

compartment (fig. B)

Caution!

- Do not use the appliance without the dust

compartment.

To remove the dust compartment, keep the 

release button (7) pressed and pull the

dust compartment (6) from the appliance.

To mount the dust compartment, insert the 

dust compartment (6) into the appliance

until the release button (7) clicks into place.

Mounting and removing the hose

(fig. C)

Caution!

- Before mounting the hose, make sure that

the dust compartment is inserted into the

appliance.

To mount the hose (8), insert the hose outlet 

(17) into the hose connection (18) until the

release buttons (19) click into place.

To remove the hose (8), keep the release 

buttons (19) pressed and pull the hose

outlet (17) from the hose connection (18).

Mounting and removing the tube

(fig. D)

To mount the tube (9), insert the hose inlet 

(20) into the tube outlet (21).

To remove the tube (9), pull the hose inlet 

(20) from the tube outlet (21).

Mounting and removing the

suction nozzle (fig. E)

The suction nozzle (12) can be mounted to

the extension tube (10).

To mount the suction nozzle (12), insert the 

tube inlet (22) into the tube connection

(23).

To remove the suction nozzle (12), pull the 

tube inlet (22) from the tube connection

(23).

Mounting and removing the

crevice nozzle (fig. D & E)

The crevice nozzle (16) can be mounted to

the hose (8) or to the extension tube (10).

To mount the crevice nozzle to the hose 

(8), insert the hose inlet (20) into the

crevice nozzle (16).

To mount the crevice nozzle to the 

extension tube (10), insert the tube inlet

(22) into the crevice nozzle (16).

To remove the crevice nozzle, pull the 

crevice nozzle (16) from the hose inlet (20)

or the tube inlet (22).

Use

Unwinding and rewinding the

mains cable (fig. A)

The mains cable rewind button (2) can be

operated by hand or foot.

Caution!

- Do not unwind or rewind the mains cable

while the appliance is switched on.

- Always hold the mains plug to unwind the

mains cable. Never pull the mains cable.

Before use, hold the mains plug and 

unwind a sufficient length of the mains

cable from the back of the appliance.

After use, press the mains cable rewind 

button (2) to rewind the mains cable back

into the appliance. Manually guide the

mains cable to make sure that it does not

swing back. Make sure that the mains plug

is correctly located.

Adjusting the length of the tube

(fig. E)

The extension tube (10) can be adjusted in

16 steps.

Keep the locking knob (24) pressed and 

slide the extension tube (10) to the required

position.

Release the locking knob (24).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Princess 332935 Red Viper Cyclone Vacuum Cleaner Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info