Bedienungsanleitung Privileg PCTAC 3040 NE (Seite 15 von 16) (Deutsch)

712774

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

CLEANING AND MAINTENANCE

• Disconnect the appliance from the power supply.

• Do not use steam cleaning equipment.

• Do not use abrasive sponges or scouring pads as

they may damage the glass.

• After each use, clean the hob (when it is cool) to

remove any deposits and stains from food residue.

• Use a scraper only if residues are stuck to the hob.

Follow the scraper manufacturer’s instructions to

avoid scratching the glass.

• Sugar or foods with a high sugar content can

damage the hob and must be immediately

removed.

• Salt, sugar and sand could scratch the glass

surface.

• Use a soft cloth, absorbent kitchen paper or a

specific hob cleaner (follow the Manufacturer’s

instructions).

• Spills of liquid in the cooking zones can cause the

pots to move or vibrate.

• After cleaning the hob, dry thoroughly.

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE SOLUTION

F0 Electronic error Disconnect and reconnect the power supply. If the error persists,

call after-sales support.

Fc Electronic control overheated, the cooking

zones are switched o.

Wait until the temperature is lowered. The cooking hob will start

working again when the temperature returns to normal.

Ft / FE Electronic temperature sensor may be

damaged.

Wait until temperature is lowered. If the message persists even

after the value returns to room temperature, call the after-sales

support.

Fb Excessive key sensitivity. Check that the glass-ceramic work top has been installed

properly.

Call after-sales support to make sure that keys touch the glass

surface correctly.

FU / FJ / FA / FC / Fd Touchpad error, this error is an automatic

keypad check. It will disappear when the

automatic check is reset to the correct

value.

If the error persists, contact the after-sales support.

Fr Relay error, there may be a problem with

one of the relays.

Disconnect the power supply, wait one minute and switch on

again. If the error persists, call after-sales support.

SAFETY SHUTDOWN

In the event that one or more cooking areas is

inadvertently left on, the safety system will shut the

zones down automatically after a certain time has

elapsed. The letter “H” will be displayed below.

IMPORTANT

To avoid a permanent damage the hob: do not use

pots with bottoms that are not flat; do not use metal

pots with enamelled bottom; do not place hot pots/

pans over the control panel.

You can download the safety Instructions, User Manual, Product Fiche and Energy data by:

• Visiting our website - docs.whirlpool.eu

• Using QR code

• Alternatively,

contact our After-sales Service (see phone number in the warranty

booklet). When contacting our After-sales Service, please state the codes provided on

your product’s identification plate.

XXXXXXXXXXXXXXX

XXXXXXXXXXXXXXXXXXXXXX

Made in X

Type: XXX Mod.: XXX

XXXXXXXXXXXXXXXXXXXX

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

400011392013

Printed in Italy

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Privileg PCTAC 3040 NE Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info