Bedienungsanleitung Privileg PCTOC 240060 F (Seite 5 von 6) (Englisch)

491448

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

GB12

Control Panel Description

The control panel is equipped with touch controls: to use them, just press the

corresponding symbol (a light touch is sufficient).

Switching on and adjusting cooking

zones

After positioning the pot on the chosen cooking zone, select the required power

level by turning the knob clockwise. Each cooking zone has different heat

settings, ranging from “1” (minimum power) to “9” (maximum power).

When a knob is set to a power setting between 1 and 9 the hob indicator light

switches on.

IMPORTANT: at the position indicated by a “______” on the cooktop knobs

there is no function: the heating element is switched off.

IMPORTANT: if no pot is placed on the hob or if the pot used is not suitable for an

induction hob, the cooking zone selected will switch off after 1 minute. To

reactivate it: place a pot that is suitable for the induction hob (see section “Before

use”) on the desired cooking zone, turn the knob to “0” and then select the

desired heat setting.

Switching off cooking zones

Turn the knob to “0”.

When all the knobs are set to “0” (or to the line “____”) the hob indicator light

switches off.

Care and maintenance

Clean the hob after each use in order to avoid damaging the surface and to

prevent the formation of baked-on deposits which are difficult to remove.

To clean the hob, proceed as follows:

1. use a soft clean cloth, absorbent kitchen wipes or a proprietary cleaner for

glass ceramic hobs. Do not use abrasive sponges and/or metal scouring

pads;

2. food spills should be cleaned off before they bake onto the glass ceramic

surface. Sugar and foods with a high sugar content damage the glass

ceramic surface and must be immediately removed using a scraper for glass;

3. remove any stubborn food residues with a scraper or proprietary

detergents;

4. salt, sugar and sand can scratch the glass ceramic hob: clean up any such

spills on the hob immediately.

Before contacting After-sales Service:

• Read and follow the instructions given in the section “INSTRUCTIONS FOR

USE”.

• Check that the electricity supply has not been shut off.

• Clean the hob and dry it thoroughly.

• Check that the knob is in the correct position: at position “0” or the levels

indicated by a continuous line, the cooking zones do not receive any power.

• If no pot is placed on the hob or if the pot used is not suitable for an

induction hob, the cooking zone selected will switch off after 1 minute. To

reactivate it: place a pot that is suitable for the induction hob (see section

“Before use”) on the desired cooking zone, turn the knob to “0” and then

select the desired heat setting.

• If the internal temperature of electronic parts is too high, the hob will

switch off automatically. Wait for the hob to cool down before using it

again. To resume operation, turn the knob to “0” and then to the desired

power level.

Before you call the After Sales Service:

• try to solve the problem (see “TROUBLESHOOTING GUIDE”);

• switch the appliance off, wait 30 seconds then switch it on again. to see if

the fault persists.

If after the above checks the fault persists, contact the nearest After-

sales Service.

Always provide:

• a brief description of the fault;

• the exact type and model of hob;

• the service number (number after the word Service on the rating plate) is

located on the underside of the cooktop or on the warranty booklet;

• your complete address and phone number.

If any repairs are required, please contact an authorized After-sales Service as

indicated in the warranty.

INSTRUCTIONS FOR USE

MAINTENANCE

WARNING

• Do not use steam cleaners.

• Before cleaning, leave the cooking

zones cool down

Power levels No function

Cooking zone positioning

Cooktop operation

lamp

Level selector

TROUBLESHOOTING GUIDE

AFTER-SALES SERVICE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Privileg PCTOC 240060 F Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Privileg PCTOC 240060 F

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info