Bedienungsanleitung Pro-form 480 CX (Seite 22 von 36) (Englisch)

708083

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

HOW TO USE AN IFIT.COM PROGRAM

DIRECTLY FROM OUR WEB SITE

Our Web site at www.iFIT.com allows you to access

programs directly from the internet. Additional options

are soon to be available. See www.iFIT.com for details.

To use programs from our Web site, you must connect

the treadmill to your home computer. See HOW TO

CONNECT YOUR COMPUTER on page 19. In

addition, you must have an internet connection and

an internet service provider. A list of specific system re-

quirements is found on our Web site.

Follow the steps below to use a program from our

Web site.

Insert the key into the console.

See HOW TO TURN ON THE POWER on page 13.

Select the iFIT.com mode.

See step 2 on page 20.

Go to your computer and start an internet

connection.

Start your web browser, if necessary, and go to

our Web site at www.iFIT.com.

Follow the desired links on our Web site to se-

lect a program.

Read and follow the on-line instructions for using a

program.

Follow the on-line instructions to start the

program.

When you start the program, an on-screen count-

down will begin.

Return to the treadmill and stand on the foot

rails. Find the clip attached to the key and slide

the clip onto the waistband of your clothes.

When the on-screen countdown ends, the program

will begin and the walking belt will begin to move.

Hold the handrails, step onto the walking belt, and

begin walking. During the program, an electronic

“

chirping” sound will alert you when the speed

and/or incline of the treadmill is about to change.

AUTION: Always listen for the “chirp” and be

prepared for speed and/or incline changes.

If the speed or incline settings are too high or too

low, you can manually override the settings at any

time by pressing the Speed or Incline buttons on

the console. However, when the next “chirp” is

heard, the speed and/or incline will change to

the next settings of the program.

To stop the walking belt at any time, press the

Stop button on the console. The time will begin to

flash in the display. To restart the program, press

the Start button or the Speed increase button.

After a moment, the walking belt will begin to

move at 2 km/h. When the next “chirp” is heard,

the speed and incline will change to the next

settings of the program

When the program is completed, the walking belt

will stop. Note: To use another program, press the

Stop button and go to step 5.

Note: If the speed and/or incline of the treadmill

does not change when a “chirp” is heard, make

sure that the letters “iFIT” appear in the display

and that the time is not flashing in the display.

In addition, make sure that the audio cable is

properly connected.

Follow your progress with the display.

See step 5 on page 13.

When you are finished exercising, remove the

key from the console.

See step 7 on page 14.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pro-form 480 CX Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info