Bedienungsanleitung Pro-form 505 ZLE - PFEVEL96010 (Seite 12 von 28) (Englisch)

554133

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

HOW TO PUT ON THE CHEST PULSE SENSOR

The chest pulse sensor has two components: a chest

trap and a sensor unit (see the drawing below). Insert

the tab on one end of the chest strap into one end of

the sensor unit, as shown in the inset drawing. Press

the end of the sensor unit under the buckle on the

chest strap. The tab should be flush with the front of

the sensor unit.

Next, wrap the chest

pulse sensor around

your chest and attach

the other end of the

chest strap to the sen-

sor unit. Adjust the

length of the chest

strap, if necessary. The

chest pulse sensor should be under your clothes, tight

against your skin, and as high under the pectoral mus-

cles or breasts as is comfortable. Make sure that the

logo on the sensor unit is facing forward and is right-

side-up.

Pull the sensor unit away from your body a few inches

and locate the two electrode areas on the inner side

(the electrode areas are covered by shallow ridges).

Using saline solution such as saliva or contact lens

solution, wet both electrode areas. Return the sensor

unit to a position against your chest.

CARE AND MAINTENANCE

• Dry the chest pulse sensor after each use. The

chest pulse sensor is activated when you wet the

electrode areas and put on the chest pulse sensor;

the chest pulse sensor shuts off when it is removed

nd the electrode areas are dried. If the chest pulse

sensor is not dried after each use, the battery may

e drained prematurely.

• Store the chest pulse sensor in a warm, dry place.

Do not store the chest pulse sensor in a plastic bag

or other container that may trap moisture.

• Do not expose the chest pulse sensor to direct sun-

light for extended periods of time or to temperatures

above 122° F (50° C) or below 14° F (-10° C).

• Do not excessively bend or stretch the sensor unit

when using or storing the chest pulse sensor.

• Clean the sensor unit using a damp cloth—never

use alcohol, abrasives, or chemicals. Hand wash

and air dry the chest pulse sensor.

TROUBLESHOOTING

If the chest pulse sensor does not function prop-

erly, try the suggestions below.

• Make sure that you are wearing the chest pulse sen-

sor as described at the left. Note: If the chest pulse

sensor does not function when positioned as

described, move it slightly lower or higher on your

chest.

• Use saline solution such as saliva or contact lens

solution to wet the two electrode areas on the sen-

sor unit. If heart rate readings do not appear until

you begin perspiring, re-wet the electrode areas.

• Position yourself near the console. For the console

to display heart rate readings, the user must be

within armʼs length of the console.

• The chest pulse sensor is designed to work with

people who have normal heart rhythms. Heart rate

reading problems may be caused by medical condi-

tions such as premature ventricular contractions

(pvcs), tachycardia bursts, and arrhythmia.

• The operation of the chest pulse sensor can be

affected by magnetic interference caused by high

power lines or other sources. If it is suspected that

this is a problem, try relocating the elliptical.

HOW TO USE THE CHEST PULSE SENSOR

Chest Strap

Sensor Unit

Tab

Buckle

Sensor

Unit

Logo

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pro-form 505 ZLE - PFEVEL96010 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pro-form 505 ZLE - PFEVEL96010

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info