Bedienungsanleitung Pro-form 6.0 RT - PFTL39511 (Seite 13 von 28) (Englisch)

553997

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

OPERATION AND ADJUSTMENT

HOW TO PLUG IN THE POWER CORD

Your treadmill, like other electronic equipment, can be

damaged by sudden voltage changes in your home’s

power. To decrease the risk of damaging your

treadmill, always use a surge suppressor with your

treadmill (see drawing 1 at the right). To purchase

a surge suppressor, see precaution 12 on page 3.

Use only a single-outlet surge suppressor that is

UL 1449 listed as a transient voltage surge sup-

pressor (TVSS). The surge suppressor must have

a UL suppressed voltage rating of 400 volts or less

and a minimum surge dissipation of 450 joules.

The surge suppressor must be electrically rated for

120 volts AC and 15 amps. There must be a moni-

toring light on the surge suppressor to indicate

whether it is functioning properly. Failure to use a

properly functioning surge suppressor could dam-

age the control system of the treadmill (see precau-

tion 13 on page 3).

This product must be grounded. If it should mal-

function or break down, grounding provides a path

of least resistance for electric current to reduce the

risk of electric shock. This product’s power cord has

an equipment-grounding conductor and a grounding

plug. Plug the power cord into a surge suppressor,

and plug the surge suppressor into an appropri-

ate outlet that is properly installed and grounded

in accordance with all local codes and ordinances.

IMPORTANT: The treadmill is not compatible with

GFCI-equipped outlets and may not be compatible

with AFCI-equipped outlets.

This product is for use on a nominal 120-volt circuit

(see drawing 1). A temporary adapter may be used to

connect the surge suppressor to a 2-pole receptacle if

a properly-grounded outlet is not available (see

drawing 2).

The temporary adapter should be used only until a

properly-grounded outlet (see drawing 1) can be in-

stalledbyaqualiedelectrician.

The green-colored rigid ear, lug, or the like extend-

ing from the adapter must be connected to a perma-

nent ground such as a grounded outlet box cover.

The adapter must be held in place by a metal screw.

Some 2-pole receptacle outlet box covers are not

grounded. Contact a qualied electrician to deter-

mine if the outlet box cover is grounded before

using an adapter.

DANGER: Improper connec-

tion of the equipment-grounding conductor

increases the risk of electric shock. Check

with a qualied electrician or serviceman if

you are unsure whether the product is prop-

erly grounded. Do not modify the plug—if it

will not t the outlet, have a proper outlet in-

stalled by a qualied electrician.

Grounded Outlet Box

Grounding Plug

Surge Suppressor

Grounding Pin

Grounded Outlet Box

Surge Suppressor

Adapter

Lug

Metal Screw

Grounded Outlet

Grounding Pin

Grounding Plug

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pro-form 6.0 RT - PFTL39511 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info