Bedienungsanleitung Pro-form 910 ZLT - PETL10812 (Seite 20 von 36) (Englisch)

553929

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

HOW TO USE AN ONBOARD WORKOUT

1. Insert the key into the console.

See HOW TO TURN ON THE POWER on page 17.

2. Select an onboard workout.

To select an onboard workout, press either the

Calorie button or the Distance button repeatedly.

When you select an onboard workout, the display

will show the duration, the distance, the name, the

maximum speed setting, and the maximum incline

settingoftheworkout.Inaddition,aproleofthe

speed settings of the workout will appear in the ma-

trix. If you select a calorie workout, the approximate

number of calories you will burn will appear in the

name of the workout.

3. Start the workout.

Press the Start button or the Speed increase button

to start the workout. A moment after you press the

button, the treadmill will automatically adjust to the

rstspeedandinclinesettingsoftheworkout.Hold

the handrails and begin walking.

Each workout is divided into segments. One speed

setting and one incline setting are programmed for

each segment. Note: The same speed setting

and/or incline setting may be programmed for con-

secutive segments.

During the

workout, the

proleson

the speed

and incline

tabs will

show your

progress.

Theashingsegmentoftheprolerepresentsthe

current segment of the workout. The height of the

ashingsegmentindicatesthespeedorincline

setting for the current segment. At the end of each

segment, a series of tones will sound and the next

segmentoftheprolewillbegintoash.Ifadiffer-

ent speed and/or incline setting is programmed for

the next segment, the treadmill will automatically

adjust to the new speed and/or incline setting.

The workout will continue in this way until the last

segmentoftheproleashesinthedisplayandthe

last segment ends. The walking belt will then slow

to a stop.

Note: The calorie goal is an estimate of the

number of calories that you will burn during

the workout. The actual number of calories

that you burn will depend on various factors

such as your weight. In addition, if you manu-

ally change the speed or incline of the treadmill

during the workout, the number of calories you

burn will be affected.

If the speed or incline setting is too high or too low

at any time during the workout, you can manu-

ally override the setting by pressing the Speed or

Incline buttons; however, when the next segment

of the workout begins, the treadmill will auto-

matically adjust to the speed and incline set-

tings for the next segment.

To stop the workout at any time, press the Stop

button.Thetimewillbegintoashinthedisplay.

To resume the workout, press the Start button or

the Speed increase button. The walking belt will

begin to move at 2 Km/H. When the next segment

of the workout begins, the treadmill will automati-

cally adjust to the speed and incline settings for the

next segment.

4. Follow your progress with the displays.

See step 5 on page 18. The display will show

the time remaining in the workout instead of the

elapsed time.

5. Measure your heart rate if desired.

See step 6 on page 19.

6. Whenyouarenishedexercising,removethe

key from the console.

See step 7 on page 19.

Current Segment

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pro-form 910 ZLT - PETL10812 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pro-form 910 ZLT - PETL10812

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info