Bedienungsanleitung Pro-form 910 ZLT - PETL10812 (Seite 23 von 36) (Englisch)

553929

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

THE INFORMATION MODE

The console features an information mode that keeps

track of treadmill information and allows you to person-

alize console settings.

1. Select the information mode.

To select the information mode, hold down the Stop

button while inserting the key into the console and

then release the Stop button. When the information

mode is selected, the following information will be

shown:

The time display will show the total number of

hours that the treadmill has been used.

The distance display will show the total number

of miles (or kilometers) that the walking belt has

moved.

The lower section of the display will show the

status of an iFit module. If an iFit module is con-

nected, the display will show the words WIFI

MODULE. If a USB module is connected, the

display will show the words USB/SD MODULE. If

no module is connected, the display will show the

words NO IFIT MODULE.

2. Select the optional screens.

While the information mode is selected, the matrix

will display several optional screens. Press the

decrease button next to the Enter button to select

each of the following screens:

UNITS—To change the unit of measurement, press

the Enter button. To view distance in miles, select

ENGLISH. To view distance in kilometers, select

METRIC.

DEMO—The console features a display demo

mode, designed to be used if the treadmill is dis-

played in a store. While the demo mode is turned

on, the console will function normally when you

plug in the power cord, press the power switch

into the reset position, and insert the key into the

console. However, when you remove the key, the

displays will remain lit, although the buttons will not

function. If the demo mode is turned on, the word

ON will appear in the matrix. To turn on or turn off

the demo mode, press the Enter button.

CONTRAST LVL—Press the Incline increase and

decrease buttons to adjust the contrast level of the

display.

If a module is connected, you may also select the

following screen:

TRAINER VOICE—To turn on or turn off the voice

of the personal trainer, press the Enter button.

If an iFit module is connected, you may also select

the following screens:

DEFAULT MENU—The default menu will appear

when you insert the key into the console or when

you press the Home button. Press the Enter button

repeatedly to select the manual main screen or the

iFit screen as the default menu.

CHECK WIFI STATUS—Press the Enter button

to check the status of your iFit module. The lower

display will show the software version number, the

network SSID, the network encryption type, the

connection status, the wireless signal strength, the

IP address of the module, the number of registered

users and their names, the results of the DNS

lookup, and the status of the iFit server.

SEND/RECEIVE DATA—To send and receive

workouts, workout logs, and updates, press the

Enterbutton.Whentheprocessisnished,the

words TRANSFERS DONE will appear in the

display.

3. Exit the information mode.

To exit the information mode, remove the key from

the console.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pro-form 910 ZLT - PETL10812 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pro-form 910 ZLT - PETL10812

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info