Bedienungsanleitung Pro-form PFMC8881 (Seite 2 von 4) (Englisch)

553977

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

How to Use the Heart Rate Monitor

The unique heart rate monitor is specially designed for

accuracy, comfort, and durability. To get the best per-

formance from the heart rate monitor, please read the

instructions below.

HOW TO PUT ON THE HEART RATE MONITOR

The heart rate monitor consists of two components:

the chest strap and the sensor unit. Follow the steps

below to put on the heart rate monitor.

Refer to the inset drawing above. Insert the tab

on one end of the chest strap through one end of

the sensor unit as shown. Press the end of the

sensor unit under the buckle on the chest strap.

Wrap the

heart rate

monitor

around

your chest.

Attach the

other end

of the chest

strap to the

sensor unit as described above. Adjust the length

of the chest strap, if necessary. The heart rate

monitor should be under your clothing, against

your skin, and as high under the pectoral muscles

or breasts as is comfortable. Make sure that the

logo is facing forward and that it is right-side-up.

Pull the

sensor unit

away from

your body

a few

inches and

locate the

two electrode areas on the inner side. Using a

saline solution such as saliva or contact lens solu-

tion, wet both electrode areas. Return the sensor

unit to a position against your chest.

HEART RATE MONITOR TROUBLESHOOTING

If the heart rate monitor does not function properly,

or if the displayed heart rate is excessively high or

low, try the troubleshooting steps below.

• Make sure that you are wearing the heart rate moni-

tor exactly as described at the left. Note: If the heart

rate monitor does not function when positioned as

described, move it slightly lower or higher on your

chest.

• Each time you use the heart rate monitor, use saline

solution such as saliva or contact lens solution to wet

the two electrode areas on the sensor unit (see the

drawing below). If heart rate readings do not appear

until you begin perspiring, re-wet the electrode areas.

• As you work out on your exercise equipment, make

sure that you are within arm’s length of the console.

For the console to display heart rate readings, the

user must be within arm’s length of the console.

• The heart rate monitor is designed to work with peo-

ple who have normal heart rhythms. Heart rate read-

ing problems may be caused by medical conditions

such as premature ventricular contractions (pvcs),

tachycardia bursts, and arrhythmia.

• The operation of the heart rate monitor can be af-

fected by magnetic interference caused by high

power lines or other sources. If it is suspected that

magnetic interference may be causing a problem,

try relocating your exercise equipment.

• If the heart rate monitor still does not function prop-

erly, test the heart rate monitor in the following way:

Hold the heart

rate monitor

and place your

thumbs over

the electrode

areas as

shown.

Chest Strap

Sensor Unit

Tab

Buckle

Electrode Areas

Sensor

Unit

Electrode Areas

Logo

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pro-form PFMC8881 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info