It is pointless to continue using it and you would be better getting a new one.
Care
Sometimes the battery may appear flat, but this could simply be dirty or loose connections
on your battery terminals. It is important to maintain the leads on a regular basis. Do this
by removing the leads from the battery, clean the inside of each connector and terminal
posts on the battery, smear the terminal posts and connectors with Vaseline, refit in there
correct positions and tighten firmly.
It is essential to keep the electrolyte level above the plates.
Note, however, that you should not overfill it, as the electrolyte is strongly acidic. When
topping up do not use tap water. Always use distilled or de-ionized water. It is important to
keep the acid level up. If necessary have it checked by your garage.
Checking the condition of your battery
Using a hydrometer, which can be purchased, from most motor accessory stores, you can
check the specific gravity of the electrolyte in each cell. The hydrometer is use to suck up a
quantity of fluid from the cell. The weighted float inside the hydrometer will register the
condition of that cell. Put the fluid back into the cell after testing, taking care not to splash
the fluid about.
For 12V Normal Lead Acid, Sealed, Leisure, Gel or Deep cycle Batteries
Input: 220V – 240V ~ 50Hz Max. 120W
Output: 12V, 2,0A DC (3,0A RMS) or 6A DC (9A RMS)
Pro-User warrants this product for a period of 2 years from the date of purchase to the
original purchaser. Warranty is not transferable. Warranty covers defect against
workmanship and materials only. To obtain warranty service, please return the unit to the
place of purchase or authorized Pro-User dealer together with your proof of purchase. The
warranty is void if the product has been damaged or not used as described in this manual.
Warranty is void if a non-authorized repair has been performed. Pro-User makes no other
warranty expressed or implied. Pro-User is only responsible for repair or replacement (at
Pro-Users’ Discretion) of the defective product and is not responsible for any consequential
damage or inconvenience caused by the defect.
