Bedienungsanleitung Pro-User SCM30 (Seite 3 von 46) (Deutsch, Englisch, Holländisch, Französisch)

807481

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

• Do not use attachments that are not recommended or sold by the charger manufacturer. To

do otherwise may result in the risk of electric shock, ﬁre, or possibly some other unforeseen

potential personal injury situations.

• When leaving a battery charger connected to either a sealed (AGM or GEL) or non-sealed

(ﬂooded battery) for extended periods of time (weeks, months, etc.), periodically check the

battery to see if it is unusually warm. This is an indication that the battery may have a weak

cell and that it could go into a thermal runaway condition. If the battery releases an excessi-

ve amount of gas or if the battery gets hotter than 55 degrees during charging, disconnect

the charger and allow the battery to cool. Overheating may result in plate distortion, internal

shorting, drying out or other damage. For ﬂooded batteries, also check individual cell ﬂuid

levels against manufacturer's recommendations for safe operation.

• Never smoke or allow a source of electric spark or open ﬂame in the vicinity of the battery or

engine. (For example: don't charge the battery next to a gas water heater.)

• Do not operate the solar panel battery controller where ventilation is restricted. The intent

here is to allow sucient airﬂow to minimize and dissipate the heat generated by the Solar

Charger Controller and to diuse the gasses that may be emitted by the battery.

• Never disassemble or attempt to do internal repairs. This voids the warranty. Disassembling

the Solar Charger Controller incorrectly may result in the risk of electric shock or create a ﬁre

hazard.

• Never charge a visibly damaged or frozen battery.

• After opening the package, examine all parts for visible damage. If you have found any

damage, please contact the company you purchased this unit from.

• Electrical devices are not toys. Keep the product away from children.

Personal precautions when you work near lead-acid batteries:

• Someone should be within range of your voice or close enough to come to your aid if you

have an accident.

• Have plenty of fresh water and soap nearby in case battery acid contacts skin, clothing, or

eyes.

• Wear complete eye protection and protective clothing. Avoid touching your eyes while

working near a battery. If battery acid contacts your skin or clothing, wash immediately with

soap and water. If acid enters an eye, immediately ﬂood the eye with running cold water for

at least 10 minutes and get medical attention as soon as possible.

• Be extra cautious when handling metal tools around a battery. If you drop a metal tool near a

battery it might spark or create a short circuit between the battery terminals and some other

metal part. Either event may cause a dangerous electrical shock hazard, a ﬁre, or even an

explosion.

• Remove all personal metal items such as rings, bracelets, necklaces, and watches when wor-

king with a lead-acid battery. A lead-acid battery can produce a short-circuited current high

enough to weld a metal ring or other piece of jewelry, causing a severe burn.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pro-User SCM30 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info