Bedienungsanleitung ProDAD Mercalli V3 SAL Windows (Seite 14 von 96) (Englisch)

608118

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

What does Avoid Border mean?

Switching on the Avoid Border mode first of all hides the empty (black) areas of the image that

result from shifting the image to stabilize it. This is done by zooming the video.

As a result, the greater the degree of shake in the video, the greater the zoom factor in the

stabilized footage.

But Mercalli V2 also features a new Smart Border Technology. It tells the user by visual signals

that in certain parts of the footage a very high zoom factor would be necessary in order to

perfectly stabilize the video. The user can then choose either to have complete stabilization of

these parts of the video or trade a lower degree of stabilization at individual points for a lower

zoom factor. The advantages of less zoom are a sharper image and preservation of original details.

The user decides what is most important for the footage in question and is not constrained by an

automatic rule.

The parts of the video where the user can decide are indicated as follows:

•

by in the respective graph with the section marked in red

•

by red markings around the video and

•

by coloring of the slider in the Avoid Border control accompanied by a red border

This signal enables the user to make adjustments interactively during playback and either

increase the degree of stabilization or shift the weighting towards less zoom. This simple manual

intervention lets the cutter fine-tune the fully automatic stabilization to suit individual tastes and

objectives, and should thus meet all needs.

Unwanted rolling shutter effects

A CMOS sensor is an image sensor used in camcorders and digital cameras.

The rolling shutter effect is a positional error in the video, which occurs in moving footage when

the frame is scanned line by line.

If the image is static, the footage is correct because all points of the frame are exposed at their

correct positions. Rolling shutter effect may result in the case of a subject in motion or a moving

camera, when a frame is scanned line by line (i.e. not all at exactly the same time).

This effect appears in the form of a diagonal distortion when filming fast-moving subjects. And

also if the filming equipment is subject to heavy shaking, as may occur when filming with a

moving camera (e.g. from a car), strong distortion of the entire image may result, severely

impairing the quality of the footage.

The image may acquire a parallelogram form compared with the subject's true shape, but it may

also be squashed or stretched.

The fully automatic Rolling-Shutter Compensation corrects the weaknesses inherent in CMOS

sensors in post-production, thus enhancing the quality of footage from action cameras, compact

photo cameras, mobile phones and, not least, digital SLR cameras.

Just click Rolling-Shutter Compensation to show the CMOS instrument (below the Preview) and

activate the correction function.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ProDAD Mercalli V3 SAL Windows Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von ProDAD Mercalli V3 SAL Windows

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info