Bedienungsanleitung Proficare HTD 3030 (Seite 25 von 44) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

814822

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

PC-HTD3030_IM 25.09.18

Accessories

• Attach a nozzle if necessary.

- You can dry single hair locks by concentrating the ow

of hot air with the hairdressing nozzle.

- The diffuser is the ideal solution to dry curly hair

without losing volume.

• In order to remove the nozzle, let the appliance cool

down. You can speed up that process by pressing the

COOL button for approx. ½ minute during operation. You

may then simply remove the nozzle.

Electrical Connection

1. Unwind the mains cable completely.

2. Before inserting the plug into the socket, make sure that

the mains voltage to be used matches that of the appli-

ance. You can nd this information on the nameplate.

3. Connect the appliance to a properly installed earthed

socket.

Use

1. Turn the appliance on with the bottom switch on the

handle. The appliance is in standby mode.

2. Select an air stream level on the handle (bottom switch):

Position 0: off

Position : gentle stream of air

Position : strong stream of air

The control lamp now illuminates.

3. Setting the Temperature level (top switch):

Position : low temperature

Position : medium temperature for gentle drying

and shaping

Position : high temperature for rapid drying

4. Now touch the sensor surface and the hair dryer will start

operating in the setting of your choice.

NOTE:

If you want to interrupt operation for a short time, put the

appliance aside. The appliance will enter the standby

mode. The settings on the hair dryer are retained.

COOL (Cold Air)

With this switch you can stop the heating process.

Hold the button down in this position according to the de-

sired interval length. When the button is released it returned

automatically to the initial position.

Ionizing Function – Reduction of Static in Hair

The appliance is also tted with an ionizer which gives off

negative ions with the air ow when switching on. This pro-

cess supports safe, gentle drying of hair and also promotes

a better hair structure, maximizes hair volume, provides for

a silky nish and also reduces static in the hair.

This process is particularly gentle on stressed hair.

Switch-off

Set the switch to “0” after use. The control lamp turns off.

Disconnect the mains plug from the socket.

Storage

• Leave the appliance to cool down before putting it away!

• Hang the appliance up by the suspension eye.

Mains Cable

• The mains cable should only be wound up loosely.

• Never tie the cable tightly round the appliance, as over

time this may result in the cable breaking.

• Check the mains cable regularly for damage.

Cleaning

WARNING:

• Before cleaning remove the mains lead from the socked.

• Under no circumstances should you immerse the appliance in

water for cleaning purposes. Otherwise this might result in an

electric shock or re.

CAUTION:

• Do not use a wire brush or any abrasive items.

• Do not use any acidic or abrasive detergents.

Clean the housing with a soft, dry cloth without additives.

Air Intake Grill

Please clean the grill on the air intake side of the hair dryer

regularly in order to avoid excessive temperatures as a

result of heat accumulation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Proficare HTD 3030 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info