Bedienungsanleitung Proficare HTH 3003 (Seite 27 von 46) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

814809

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

PC-HTH3003_IM 06.10.17

NOTE:

• High temperatures can arise in areas with little or no hair

between the hair-dryer hood and the skin. Select the

correct heat /blowing level.

• Warm air can blow into the ears.

• Oil and grease can leave traces on the hair-dryer hood.

Clean these as directed under “Cleaning”.

Hair Dryer

If you wish to dry specic sections of your hair only, attach the

styling nozzle. That will concentrate the air ow.

Round brush (Curling brush)

If you wish to style your hair curly, attach the round brush.

Comb your hair and separate it into single strands. Twist one

hair strand around the brush starting from the tips all the way

to the hairline. Keep holding the appliance in that position for

several seconds until the desired degree of drying and styling

has been achieved.

Assembly / Disassembly of Attachments

WARNING: Risk of burns!

If you want to change an attachment directly after use, let

the appliance cool down rst!

CAUTION:

The locking mechanism can break if you install or remove

the attachments in any other way than as described.

Note the guides on the basic appliance and in the attach-

ments. The attachments have an additional marking on the

outer edge.

• Put on an attachment until it audibly snaps into place.

Make sure that the marking is in line with the button.

• Press the button on the basic appliance in order to release

the locking. Remove the attachment.

Electrical Connection

1. Before inserting the plug into the socket, make sure that

the mains voltage to be used matches that of the appli-

ance. You can nd this information on the nameplate.

2. Connect the appliance to a properly installed earthed

socket.

Use

1. After washing your hair dry it with a towel.

2. Select the desired attachment.

3. Unwind the mains cable completely.

4. Shift the switch on the handle to one of the desired heat /

blowing levels:

Level 0: Off

Level 1: Medium temperature

Level 2: High temperature

Level : Cold setting for style x

Ionizing Function – Reduction of Static in Hair

The appliance is also tted with an ionizer which gives off

negative ions with the air ow when switching on. This pro-

cess supports safe, gentle drying of hair and also promotes

a better hair structure, maximizes hair volume, provides for a

silky nish and also reduces static in the hair.

This process is particularly gentle on stressed hair.

Switch-off

Set the bottom switch to “0” after use and disconnect from

the mains.

Storage

• Leave the appliance to cool down before putting it away!

• Remove the attachment.

NOTE:

Let the hair-dryer hood dry completely after use!

• Stow the appliance and the attachments in the provided

storage bag.

• You also have the option to hang the appliance on the

suspension eye.

Mains Cable

• The mains cable should only be wound up loosely.

• Never tie the cable tightly round the appliance, as over

time this may result in the cable breaking.

• Check the mains cable regularly for damage.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Proficare HTH 3003 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info