Bedienungsanleitung Proficare LR 3083 (Seite 50 von 86) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

814799

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

PC-LR3083_IM_new2_14.01.2021 14.01.21

Time-delayed Switch-off

You can set a time-controlled switch-off for the appliance.

NOTE:

This is only possible when the appliance is switched on.

• Use the TIME button to select a time setting between

and .

• Upon expiry of the timer, the appliance will switch off

automatically.

Child Lock

Press and hold the 3s

button for about 3 seconds to acti-

vate or deactivate the child lock. This prevents the operation

of the appliance. CHILD LOCK lights up in the display

when the childproof lock is activated.

Ionizing Function

The electronic ionization of the air causes dust particles to

become electrostatically charged. As a result, they combine

to form larger particles and thus get caught by the HEPA

lter in a more reliable manner.

• Press the ANION button to activate or deactivate the

ionization function.

NOTE:

If the ionization function is activated, the ANION button

lights up on the control panel.

Cleaning / Maintenance

WARNING:

• Switch off the appliance before cleaning and maintenance. Dis-

connect the power adapter from the electrical outlet.

• Never immerse the motor housing in water for cleaning. It could

result in an electric shock or re.

CAUTION:

• Do not use any wire brush or other abrasive objects.

• Do not use any acidic or abrasive detergents.

• Clean the motor housing with a dry cloth, without

additives.

You can moisten the cloth slightly to wipe away extreme

soiling.

• If the FILTER REPLACE button ashes, the lter has to

be cleaned or replaced.

NOTE:

Despite this message, the appliance may still be operated

with condence. After you have cleaned or replaced the

lter, press the FILTER REPLACE button for approx.

3 seconds. The lighting of the button goes out.

Cleaning the Filter Element / Replacing the Filter Element

1. Turn the appliance upside down.

2. Open the cover by unscrewing and removing it coun-

ter-clockwise.

3. Remove the lter insert. If required, you may clean the

lter element by beating it slightly or wiping it gently with

a soft brush or a damp cloth.

CAUTION:

Do not immerse the lter element in water!

Replace the lter if it is heavily soiled.

einstall the lter insert.

4. Tighten the cover clockwise. Pay attention to the

notches.

Cleaning the Sensor

NOTE:

• Only clean the sensor after the lter element has been

cleaned or replaced.

• If the sensor is the only component that is cleaned

it will become dirty very quickly. This may cause the

displayed air quality to be no longer accurate. It is

therefore necessary to always clean both the lter

element and the sensor.

1. Open the cover on the back of the appliance.

2. Clean the sensor and the rest of the area at least once

every two months. Vacuum the area with a vacuum

cleaner.

3. Close the cover again. It must audibly engage.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Proficare LR 3083 Seite 50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info