Bedienungsanleitung Proficare PW 3008 BT (Seite 42 von 70) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

814856

Zoom out

Zoom in

Vorherige Seite

1/70

Nächste Seite

PC-PW3008 BT_IM 28.09.17

Use

NOTE:

• The buttons are sensor touch buttons. Touch the but-

tons lightly with a nger to execute the function.

• The scales are factory set with the units “kg” and “cm”.

To change the settings to “lb” or “st:lb” as well as “ft:in”,

proceed as follows:

1. Turn on the scales by light pressure with the foot onto the

weighing surface.

2. Press the or button repeatedly until the desired

weight unit is displayed. The unit for the height also auto-

matically changes.

Weighing Function

1. Place the scale on a hard, at surface (avoid carpets). An

uneven oor contributes to inaccurate measurements.

2. Stand on the scales with both feet. The appliance

switches on automatically.

3. Distribute your weight equally and wait for the scale to

determine your weight.

4. The digits on the display will ash before your exact

weight will be shown.

• In order to extend the battery life, the appliance will

automatically turn off 15 seconds after you have stepped

off the scale.

• If there is no weight determination while “0.0” is shown,

the scale will shut off automatically after 15 seconds.

Saving Personal Data

NOTE:

• The scale has default values that you can change, as

described below.

• Carry out the following steps in sequence and within a

few seconds. Otherwise, the appliance will automati-

cally cancel input mode.

• Holding one of the buttons ( / ) pressed for approx.

2 seconds selects fast mode.

1. Press the button . The memory location selected last

ashes on the display (for example P0). Conrm the

setting by pressing or select another memory space

by pressing the / button. Then press to go to the

next setting.

2. The symbol for “male” or “female” will ash. Conrm the

setting by pressing or use the / button to choose

the symbol for your gender. Then press to go to the

next setting.

3. The height setting will ash. Select your height by press-

ing or button. Conrm your entry by pressing .

4. The setting age will ash. Select your age by pressing

or button. Conrm your entry by pressing .

5. The short display “ ” will terminate the entry mode

for this memory location. Then you will see the memory

location, the symbol of the gender and the weight “0.0 kg”

(0.0 lb / 0: 00 st:lb) in the display.

You now have the following options:

• Press the button repeatedly to display the settings

again or to change them.

• You can set further preset locations. Proceed as de-

scribed above.

• You can immediately start measuring.

Measurement and Analysis

Record your personal data in the memory.

NOTE:

• The analysis scale will only work correctly when you

are standing on the contact surfaces barefoot and with

slightly moistened foot soles, if possible. Completely

dry foot soles can lead to unsatisfactory results as they

have a conductivity that is too low.

• If necessary wipe the contact surfaces to improve

results.

• Due to the signicant uctuation of body fat, it is difcult

to attain a standard value. Therefore, to obtain consist-

ent data, always measure at the same time of day.

• Amongst other things, our body consists of body

fat, body water, muscle mass and bone weight. The

obtained values may differ due to individual water reten-

tion within these main components. This is normal and

highly dependent on nutrition and lifestyle.

1. Press the button. Use the / button to select the

stored position at which your data is saved. The location

ashes for approx. 3 seconds. Then you will see the

memory location, the symbol of the gender and the weight

“0.0 kg” (0.0 lb / 0: 00 st:lb) in the display.

2. Stand on the contact surfaces (5) of the scales with both

feet.

3. Firstly your weight will ash on the display. The analysis

starts after the display has stopped ashing. You’ll see

a treadmill “ ” in the display during the analysis.

Remain on the scales until the last display (body age)

has appeared.

The following results are displayed one after the other:

1. The weight in the previously selected unit (kg / lb / st:lb)

2. The body fat proportion in % (fat)

3. The proportion of body uid % (TBW)

4. The proportion of muscle mass in % ( )

5. The bone weight in kg ( )

6. The basal metabolic rate of the daily energy requirement

in KCAL

7. The Body Mass Index (BMI)

8. The visceral fat ( )

9. The biological age (body age)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Proficare PW 3008 BT Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info