Bedienungsanleitung ProfiCook FW 1173 (Seite 39 von 66) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

814455

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

PC-FW1173_IM 20.12.18

Assembly of the Meat Grinder

NOTE:

The design of the perforated disks represents a rmly

connected unit. This should not be loosened under any

circumstances.

• Please also observe our illustrations under “A” (Page 4).

• Please follow points 1 to 4 as described under “Prepa-

ration”.

5. Insert the knife with the sharpened edge outwards onto

the shaft of the scroll.

6. Select a perforated disc (10). Use the recesses to do so.

7. Rotate the catch clockwise.

More details can be found under “Electrical connection” &

“Operation”.

Assembly of the Sausage Attachment

• Please also observe our illustrations under “B” (Page 4).

• First proceed as described under “Preparation” and

“Assembly of the Meat Grinder”, points 1 to 6.

7. Position the sausage attachment on the spiral housing.

8. Rotate the catch clockwise.

More details can be found under “Electrical connection” &

“Operation”.

Mounting of the “Kebbe” Attachment

• Please also observe our illustrations under “C” (Page 4).

• Please follow points 1 to 4 as described under “Prepa-

ration”.

5. Position the 2-piece Kebbe attachment on the shaft of

the spiral. Use the recesses to do so.

6. Rotate the catch clockwise.

More details can be found under “Electrical connection” &

“Operation”.

Electrical Connection

1. Check whether the mains voltage that you want to use,

corresponds with that of the appliance. You will nd the

information about it on the rating plate.

2. Ensure that the function switch is set to “ ” (Off).

3. Only connect the appliance to a properly installed safety

socket.

Switch Functions

Function Switch ON / R (On / Return)

Use the switch (3) to select the desired operating mode for

the switch (2).

Switch ON / / R (Forward / Off / Return)

The appliance is equipped with a forward and return

function. If the scroll should block, you can use the return

function, in order to release it.

-Forward

• Turn the switch (3) to “ON”.

• Turn the switch (2) to “ON”. The appliance is in the

“Forward” mode.

-Return

• Turn the switch (2) to “ ” nd wait until the motor

stops.

• Turn the switch (3) to “R”. Press “R” on the switch (2).

The appliance will be in the “Return” mode as long as

you keep the switch pressed down.

-Switching Off

• Move the switch (2) to “ ” and pull the power plug.

Operation

WARNING: Risk of injury!

Always use the supplied tamper. Never insert your ngers

or tools into the lling neck!

CAUTION:

Do not use the appliance for longer than 10 continuous

minutes. Let it cool for 10 minutes before using it again.

1. Put the pieces of meat (meat paste / sausage mass or

dough) on the lling tray and into the ller neck.

2. Stuff, if necessary, the meat respectively the dough with

the tamper (7).

Ending Operation

1. Disconnect the power plug.

2. Disassemble all parts of the meat grinder.

3. Clean the parts used as described under “Cleaning”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ProfiCook FW 1173 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info