Bedienungsanleitung ProfiCook PC-AE 1001 (Seite 35 von 70) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

482870

Zoom out

Zoom in

Vorherige Seite

1/70

Nächste Seite

Special Safety Instructions for

this Machine

WARNING:

• Riskofcuts!Thecentrifugesieveissharp!

• Iftherotatingsieveisdamaged,thedevice

shall not be operated.

• Alwaysusethesuppliedtamper.Donotinsert

your ﬁngers or tools into the ﬁller opening.

• Donotoperatethemixerformorethan1min-

ute! Afterwards, let it cool for approximately

3 minutes before you use it again.

• Donottouchanymovingpartsofthemachine

and always wait for it to stop.

• Themachineshouldonlybeusedundersuper-

vision!

• Donotmanipulateanyofthesafetyswitches!

• Donotremovethelidduringoperation.

• Donotputyourngersintothelleropening.

Designated use

This appliance is intended to extract juice from fruit

and vegetables.

Do not use for too hard foodstuffs such as nuts or

chocolate.

It is intended for the use in private households and

similar applications.

It is only to be used as instructed in this user

manual. The appliance is not intended for com-

mercial use.

Any other use shall be considered as not intended

use and can lead to material damage or even

personal injury.

The manufacturer shall not be liable for damages

caused by not intended use.

Supplied parts

1 base device with motor

1 transparent cover

1 tamper

1 centrifuge sieve

1 centrifuge housing

1 pomace container

Unpacking the appliance

1. Remove the device from its packaging.

2. Remove all packaging materials like foils, ﬁlling

materials, cable holders, and carton packaging.

3. Check the scope of deliveries for completeness.

 NOTE:

There may still be dust or production remains on

the device. We recommend that you clean the

device as described under “Cleaning”.

Description of the Parts

1 Tamper

2 Filler opening

3 Transparent cover

4 Safety switch

5 Centrifugal sieve

6 Centrifuge casing

7 Drive wheel

8 Safety bracket

9 Control panel

10 Base device with motor

11 Pomace container

Preparations

For assembly, also refer to the illustrations on

page 3.

1. Set the device so that the switch points towards

you.

2. Tilt the safety handle to the right.

3. Attach the pulp container on the left side. In

the next step it is secured by the collar of the

centrifuge casing.

4. Attach the centrifuge casing on top of the base

casing. The base casing has a recess. Here the

spout of the centrifuge casing must be placed.

WARNING risk of cuts! The centrifugal

sieve is sharp!

5. Place the centrifugal sieve on top of the drive

wheel. Press it down. It clicks in place on the

drive wheel.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ProfiCook PC-AE 1001 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info