Bedienungsanleitung ProfiCook PC-HM 1026 (Seite 42 von 82) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

552322

Zoom out

Zoom in

Vorherige Seite

1/82

Nächste Seite

Intended Use

This appliance is intended for mixing, stirring,

beating, pureeing or cutting food. It is suitable for

processing common household quantities.

It is only designed for this use and should only be

used for this intended purpose.

Only use this device as instructed in this user

manual. Do not use this device commercially.

No other use is intended and can cause damage

or personal injuries.

The manufacturer is not responsible for any dam-

ages incurred due to improper use.

Location of Controls

1 Multi-function switch and button

• On/Off switch

• Switch for speed settings 1 to 5

• Eject button for dough hooks and beaters

2 TURBO button

3 Fixture with cover for attaching the blender

stick

4 Ring marking

5 Dough hooks

6 Blender stick

7 Housing

8 Fixture for attaching dough hooks and beaters

9 Beaters

Unpack Device

1. Take the device out of its packaging.

2. Remove all packaging materials, such as foils,

lling materials, cable ties and cartons.

3. Check that all accessories are included in the

box.

4. If the contents of the box are incomplete or if

damage is found, do not operate the appliance.

Return it to the dealer immediately.

NOTE:

Clean manufacturing residues and dust from the

device as described under “Cleaning”.

Assembly / disassembly

CAUTION:

Safety mechanisms prevent the simultaneous

assembly of the blender stick and the dough

hooks / beaters. Do not try to bypass them!

Assembly of dough hooks / beaters

NOTE:

• For safety reasons, the xtures for the dough

hooks / beaters will lock once the blender

stick is attached.

• The dough hook with the ring marking on

its shaft must only be attached to the right

(larger) tting of the mixer. The other dough

hook is intended for the left tting. The two

dough hooks must not be attached without

following these instructions.

1. Make sure the switch (1) is at the “0” posi-

tion and the appliance disconnected from the

mains.

2. Push the ends of the dough hooks or beaters

into the respective ttings until they lock into

place. Slightly turning the accessories might

help facilitate the process of attaching.

Disassembly of dough hooks / beaters

Press the release button (1) to release the acces-

sories. This is only possible, when the switch (1) is

set to the “0” position or the blender stick symbol.

Assembly of the blender stick

NOTE:

• For safety reasons, the blender stick cannot

be used once the dough hooks or beaters

are attached.

• The xture for attaching the blender stick (3)

is located on the bottom of the appliance.

1. Make sure that the switch (1) is set to the “0”

position and that the appliance disconnected

from the mains.

2. Slide the protective cover open in order to

expose the xture.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ProfiCook PC-HM 1026 Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info