Bedienungsanleitung Profile 211000008 (Seite 5 von 8) (Deutsch, Englisch, Holländisch, Französisch)

730641

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

211000008

5 Keys : SET - C/F - DOWN/CH - RF ALARM - SNZ/LIGHT

RCC reception from: DCF

Barometric pressure display

Weather forecast: Sunny, Partly sunny, Cloudy, Rainy and Stormy

Low Battery indicator for outdoor sensor and station

Time,date and week display

Temperature in °C/°F

Indoor temperature (0°C~50°C)

Outdoor temperature (-40°C~60°C)

Indoor humidity (20%-99%)

Outdoor humidity((20%-99%))

Outdoor/indoor temperature and humidity trend

Moon phase display

Alarm and Snooze

Summertime setting

LED back light

Functions

A. START OR RESET

• Default time : 2013.01.01 00:00

• Default temperature °C

• Barometer unit : Hpa

• Weather station : partly sunny

• DST : ON

• The LCD display lights up for 3 seconds when changing new battery or reset-

ting, then with a sound BI the display turns into normal state, after testing

temperature and barometer, and receiving RF for 3 minutes：Then enters in

to RCC reception mode.

B. TIME SETTINGS

• In the time display mode Press “SET” for 2 seconds to enter time setting :

• Press “SET” to navigate between settings :

• Time zone - 12/24HR - Hour - Minute - Year - Month - Day - Barometer - Exit

• Press “UP/RCC” once to go ahead one step; press and hold for 2 seconds, go

ahead 8 steps/seconds speed.

• Press “DOWN/CH” once to go back one step, press and hold for 2 seconds, go

back 8 steps/seconds speed.

Info :

The pascal (symbol: Pa) is the SI derived unit of pressure, and is defined as one

newton per square meter.[1]

Common multiple units of the pascal are the hectopascal (1 hPa = 100 Pa) which is

equal to one millibar,

Inches of mercury, (inHg and "Hg) is a unit of measurement for pressure. It is still

used for barometric pressure in weather reports, refrigeration and aviation in the

United States.

It is defined as the pressure exerted by a circular column of mercury of 1 inch in

height at 32 °F (0 °C) at the standard acceleration of gravity : 1 inHg = 3386.389 Pa

at 0 °C.

C. ALARM SETTINGS

At standard mode : press “ALARM” swift to enter alarm mode

The “ALM” will display on the position of weekday .

At “ ALARM” mode : press “ALARM” the alarm icon will appear or disappear (alarm

ON/OFF)

Hold “ALARM” enter to alarm setting , the hours starts twinkling

Press “ALARM to navigate between settings : hour - minute - exit

Press “UP/RCC” once to go ahead one step; press and hold for 2 seconds, go ahead

8 steps/seconds speed.

Press “DOWN/CH” once to go back one step, press and hold for 2 seconds, go back

8 steps/seconds speed.

After setting : press “ALARM” to confirm or do not touch any key for 10s to exit

settings

D. ALARM AND SNOOZE

• Default time : am 7:00

• With a sound BIBI for 2 minutes ,when setting alarm time is coming

• When alarm sounds , press “SNZ/LIGHT” to active snooze ：the clock will start

beeping again after 10 minutes.

• No matter on alarm mode or snooze , press any key except SNZ/LIGHT to exit

and return to normal time mode.

E. INDOOR TEMPERATURE

• Temperature range 0°C/32°F +50°C/122°F

• Testing cycle : 30 seconds

• Temperature resolution +/- 1°C

• When the current temperature exceeds the maximum temperature ,it will

show maximum temperature

• When the current temperature is lower than the minimum temperature, it

will show the minimum temperature .

• When ALRM/RCC/RF the clock will stop checking temperature until ALARM/

RCC/RF stops

Temperature trend

• Temperature rise of 1°C/2°F,arrow upward

• Temperature drop 1°C/2°F,arrow down

• Temperature changes in the scope of 1°C/2°F, arrow displays horizontal.

• Temperature compared at the current date and the date before 3 hours,

• the clock records data every 30 minutes

F. OUTDOOR TEMPERATURE

• Temperature range : -40°C/-40°F +60°C/140°F

• Temperature resolution +/- 1°F

• When the current temperature exceeds the maximum temperature ,it will

show maximum temperature

• When the current temperature is lower than the minimum temperature, it

will show the minimum temperature .

• The clock will register RF signal for 3 minutes automatically when power by

battery, then enter RCC receiving

ELTRA NV

Pachtgoedstraat 2

9140 Temse

www.profile.eu

Art. 201100008

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Profile 211000008 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info