Bedienungsanleitung Profile 282000110 Sirocco (Seite 13 von 20) (Deutsch, Englisch, Holländisch, Französisch, Spanisch)

730611

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

ELECTRIC CONVECTOR HEATER EN - 1

282000110 Sirocco

We thank you for the purchase of this Profile product.

Caution: It is important that you read this manual before

using the product Then keep this manual in a safe place.

Technical information

 Mains voltage: 220V – 240V AC (50/60Hz)

 Power: - In position 0  OFF

- In position 1  750W

- In position 2  1250W

- In position 3  2000W

 IPX0 (no protection against water)

 Protection against overheating

 Adjustable built-in thermostat

 Ideal for usage in dry areas up to a maximum of 25m²

Connection

The heater is supplied with a plug. Never use the

appliance with a damaged cable and/or plug, after the

heater has not been working properly, or if it has been

damaged in whatever way.

The replacement of a cable and/or socket plug may only

be done by a qualified professional who is familiar with

the applicable requirements.

Installation

 Carefully turn the radiator on its side to assemble the

feet.

 Fit each foot (fig. 1) and tighten them with the screws

supplied.

 Two screws are needed for each foot. Do not use the

radiator if the feet are not properly assembled!

Fig. 1

Operation and functions

Operation:

 Switch the power switches to position 0.

 Insert the plug in the socket.

 Press the switch(es) with the required wattage

to switch the radiator on.

Use:

 The thermostat will automatically maintain your desired

room temperature.

 Switch on one or a number of switches depending on

the speed at which you want to obtain the desired

temperature.

o Switch 1: 750W

o Switch 2: 1250W

o Switches 1 and 2: 2000W

 Turn the thermostat clockwise until you hear a click.

This sound means that the heater is now switched

on.

 If the indicator light is on the heater is working.

 Turning the thermostat clockwise increases the

temperature set. Conversely, turning it anticlockwise

lowers the temperature set.

 The thermostat automatically switches the heating

on and off when the set temperature has been

reached.

Note

 Allow the radiator to fully cool down before moving it

and always use the handle for this purpose.

 Protection against overheating: if this is activated the

radiator switches itself off. Then switch the radiator

off and pull the plug from the wall socket. Allow it to

cool down and remove any hindrances before using

the radiator again.

Cleaning

 We advise you to carefully clean the heater once a

month to remove dirt and dust. This ensures the

heater will continue working efficiently and safely.

 Always switch the thermostat off and remove the

plug from the socket. Make sure the appliance has

fully cooled before cleaning.

 Clean the housing with a clean, soft and lightly

moistened cloth. Never clean the heating elements

or thermostat in water. Blow as much dust as

possible off the heating elements. This extends the

life of the appliance and eliminates fire risks.

 Let everything dry thoroughly before switching the

heater on again. Do not use any detergent, wax or

cleaning agents; these can react under the influence

of heat and cause the colour to deteriorate.

 Save the box for storage during periods you are not

using the ceramic heater. When being stored the

heater must also be protected against dirt and dust.

Guarantee

The guarantee period amounts to 2 years and

commences on the date of purchase. During the

guarantee period Eltra NV resolves any defects

caused by material or manufacturing faults. Eltra NV

may choose to either repair or replace a defective

appliance.

Eltra NV is not obligated to repair or replace units if the

defect is a result of damage, misuse, modification or

changes made after the date of purchase.

Bring the defective device, along with the original sales

receipt, back to the shop where the unit was

purchased. Always include a note describing the

problem.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Profile 282000110 Sirocco Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info