Bedienungsanleitung Profile 545142015 (Seite 15 von 20) (Deutsch, Englisch, Französisch, Spanisch)

730588

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Stand Fan EN - 3

545142015

WARNINGS

• Never place the fan near flammable liquids and units operating on gas.

• Make sure that the fan cannot come into contact with water or other liquids, this can lead to the

risk of electric shock.

• Do not insert objects or fingers in the rotating fins of the unit. Protect your children from this danger.

• Never try to repair the unit yourself. All interventions that are performed by an unauthorised person

could be dangerous; the warranty will be void in this case. Also the replacement of the power cord

needs to be performed by a qualified electrician

• Use this unit only inside and operate it according to these instructions. Do not use the unit for other

purposes.

• Do not use the unit outside and always place it in a dry environment.

• Check the power cord from time to time. Never use the power cord, plug or appliance when they

are damaged.

• Unplug the fan from the outlet before moving the fan.

• Unplug the fan before cleaning the fan.

• Make sure the fan is on a flat and stable surface during operation so that it cannot fall over.

• Never use an extension cord.

• Do not use chemical products to clean the fan.

• Make sure that children are supervised by an adult when they are near a working fan.

ASSEMBLY

• Unscrew the fixing screw and ring from the stand (1)

• Place the weight on the bottom side of the base (2). Then screw the stand tight with the ring and

fixing screw (3)

• Fasten the back of the safety grate on the motor using the 4 screws (4).

• Fasten the fan blade on the rotating bar and make sure that the fan blade does not touch the

safety grate. Firmly tighten the screw (5)

• Click the mounting brackets on the grill from the front towards the outside. Then place the grill

(front) and attach it by clicking the brackets back down (6). Insert the fixing screw (7)

• Fasten the fan on the stand using the large and small screw (8)

OPERATION

• The airflow can be directed up or down by loosening the large and small button on the stand

before tightening again.

• To make the fan head swivel or put it in a fixed position use the swivel button, it is operated by

pulling it out or pushing it in.

• The height of the fan can be adjusted by loosening the button at the bottom of the stand and

gently sliding the fan up or down. Then tighten the button again.

• You can set the speed of the fan with the speed button on top of the device:

0 = off / 1 = low / 2 = medium / 3 = high

MAINTENANCE

Warning:

To prevent an electrical shock you should turn the unit off and unplug it from the wall outlet before you

start any maintenance or repairs.

Cleaning

• Remove the plug from the wall outlet before cleaning the device.

• Clean the enclosure with a soft, damp cloth. Do not use chemical solvents (such as benzene,

alcohol, gasoline).

• Do not let water drops fall on the device.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Profile 545142015 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Profile 545142015

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info