Bedienungsanleitung Profile Marin 100000143 (Seite 13 von 19) (Deutsch, Englisch, Holländisch, Französisch, Spanisch)

730605

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

BATHROOM FAN HEATER EN - 1

100000143 MARIN

Thank you for purchasing this Profile product. Caution: It

is important that you read this manual before using the

product Then keep this manual in a safe place.

Technical information

 Mains voltage: 220V

– 240V AC (50Hz)

 2 positions: 1000W-2000W

 For spaces of max. 15m²

 Ventilation function

 With adjustable, built-in thermostat

 With towel bar

 With wall fastening

 With protection against overheating

 IP22

Connection

The heater is supplied with a plug. Never use the

appliance with a damaged cable and/or plug, after the

heater has not been working properly, or if it has been

damaged in whatever way.

The replacement of a cable and/or socket plug may only

be done by a qualified professional who is familiar with

the applicable requirements.

Installation

 Respect the minimum distance from objects.

 Drill 2 holes in the wall with a horizontal space

between the holes of 222 mm.

 Insert the plugs supplied into the drill holes and

screw in the screws.

 Hang the appliance over the screws using the

recesses provided on the rear side of the heater.

Operation

Operation:

 Switch the power switches to position 0

 Insert the plug in the socket

 Set the power switch to the desired position

Use:

 The thermostat will automatically maintain your

desired room temperature.

 Set the power switch to the desired position:

o : Ventilation function

o I: 1000W

o II: 2000W

 Turn the thermostat clockwise until you hear a click.

This sound means that the heater is now switched

on.

 If the indicator light is on the heater is working.

 Turning the thermostat clockwise increases the

temperature set. Conversely, turning it anticlockwise

lowers the temperature set.

 The thermostat automatically switches the heating

on and off when the set temperature has been

reached.

Cleaning

 We advise you to carefully clean the heater once a

month to remove dirt and dust. This ensures the

heater will continue working efficiently and safely.

 Always switch the thermostat off and remove the

plug from the socket. Make sure the appliance has

fully cooled before cleaning.

 Clean the housing with a clean, soft and lightly

moistened cloth. Never clean the heating elements

or thermostat in water. Blow as much dust as

possible off the heating elements. This extends the

life of the appliance and eliminates fire risks.

 Let everything dry thoroughly before switching the

heater on again. Do not use any detergent, wax or

cleaning agents; these can react under the influence

of heat and cause the colour to deteriorate.

 Save the box for storage during periods you are not

using the ceramic heater. When being stored

the heater must also be protected against dirt and

dust.

Guarantee

The guarantee period is 2 years and commences on

the date of purchase. During the guarantee period

Eltra NV resolves any defects caused by material or

manufacturing faults. Eltra NV may choose to either

repair or replace a defective appliance.

Recesses

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Profile Marin 100000143 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info