Bedienungsanleitung Profile PAC-114 Design multi Videophone (Seite 12 von 20) (Deutsch, Englisch, Holländisch, Französisch)

566752

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Profile Videophone EN - 1

PAC-114

We thank you for the purchase of this Profile product.

Note: It is important that you read this manual carefully

before using the product. Then keep this manual in a safe

place.

Introduction (fig. 1)

1. LCD screen

2. Up function key

3. MENU key

4. Left function key

5. Door lock button

6. Loudspeaker

7. Play/Pause key

8. Right function key

9. Conversation/Monitor key

10. Down function key

11. SD card slot (SD card not included)

12. Mini USB slot

Assembly instructions

1. If there is not yet any wiring

 The position of the monitor is determined as follows:

the height amounts to approximately 165 cm, and is to

be max. 150 cm from a plug socket where the adapter

will be plugged in. The connecting cable between

monitor and outside camera must therefore come

from the wall behind the monitor. Provide a tube so

the cable can move freely. If possible also provide a

tube with a sufficiently large diameter (20-25mm).

 Determine the position of the camera outside at the

door. The ideal installation height is 155 to 165 cm.

Shorter and taller persons then also remain in picture.

 Bring the camera cable to the monitor from outside to

inside; the cable is moulded.

 Connect the wiring according to the diagram below.

The power supply wiring may not be extended or cut

through: this causes the appliance to work poorly and

invalidates the guarantee.

 Note: respect the correct polarity.

Red = ‘+’, Black = ‘-‘

 Cut off the cables with 2 cores without door lock.

 If a door lock is to be connected, its connection must

be from the camera as shown in the diagram above.

The lock may consume no more than 300 mA and must

have a memory function (the lock remains free until

just before the door is pushed open). The 2 wires are

already provided in a moulded cable (4m).

2. if there is already existing wiring (max.

25m):

 The wire diameter must be between 0.6 and 0.8 mm².

 Shorten the moulded cables to the desired length and

strip the wires approximately 1cm. If an electrical door

lock is used: also strip the 2-core cable over a length of

1 cm.

The door lock is connected from the camera with the

moulded cable with two wires. The lock may consume

no more than 300 mA and must have a memory

function (the lock remains in a free position as long as

the door is not pushed open).

 Provide a recess behind the camera in the wall or door

frames, connect the wiring using the connecting blocks

and push this into the recess. If you cannot do this the

wires must be twisted together and insulated with

insulation tape.

Use of the doorbell and videophone functions

A. Having a normal conversation

1. Ringing on the external unit

2. The picture automatically appears on the monitor

inside.

3. Press the conversation key and speak to the

visitor.

4. The door lock can be operated with the key for

that purpose.

5. Press the conversation key again to end the

conversation.

B. Making a visual check

1. If the conversation key is pressed once without

ringing you can make a visual check.

2. You can stop the picture by pressing the

conversation key again.

C. Changing functions

1. Press the conversation key

2. Press the menu key and using the left and right

function keys set the ringing volume, brightness,

contrast and the colour intensity

3. Changing functions by again pressing the menu

key.

Using the multimedia functions

1. Insert your SD/MMC/MC card with photos, music,

and/or film files in the slot for that purpose.

2. Press the play/pause button to activate the menu.

3. Select the desired folder using the function keys and

confirm with the Play/Pause button.

A. Photo slideshow (JPG)

a. Select ‘Photo’ in the main menu

b. Click on Play/pause. A slideshow of your photos on

the SD card automatically starts

c. Press Menu to go to the photo summary

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Profile PAC-114 Design multi Videophone Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info