Bedienungsanleitung Profile PAC-206 Classic Parlofoon (Seite 1 von 2) (Englisch)

566753

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Profile Intercom EN - 1

PAC-206

We thank you for the purchase of this Profile product.

Note: It is important that you read this manual carefully

before using the product. Then keep this manual in a

safe place.

Technical information Internal unit

 Supply voltage adapter: 230VAC/15VDC 1A

 Working current: 170 mA + 50mA

 Operating temperature: -10°C to 60°C

 Max relative humidity: 85%

 Total dimensions: 265(L) x 94(B) x 45(H) mm

Technical information External unit

 Working current: < 300mA

 Temperature for use: -20°C / +50°C

 Total dimensions: 120 (L) x 41 (B) x 45 (H) mm

Technical requirements for connections

 Use either the cable supplied measuring 10 metres

or own wiring measuring 0.6 - 0.8mm² with a max.

length of 25 metres.

 You need a plug socket that is max. 1.5m from the

internal unit.

 Required wiring without door lock: 3

 Required wiring with door lock: 5

Parts

 Internal unit with receiver

 External unit

 Protective cover for external unit

 Mounting bracket internal unit

 Fixing screws

 Connecting cable 10 m

Safety instructions

 The internal/external unit may never be cleaned

with detergents. Only clean with soap and a damp

cloth.

 The power wiring may never be cut through nor

extended; this renders the guarantee invalid!

 The internal unit may not be placed close to

magnetic fields such as next to a TV or thick power

cables.

 Water may never be poured over the internal and

external unit. The external unit is only splashproof.

Assembly instructions

1. If there is not yet any wiring:

 The position of the internal unit is determined as

follows: the height amounts to approximately 165

cm, and is max. 150 cm from a plug socket where

the adapter will be plugged in. The connecting

cable between the internal unit and external unit

must therefore come out of the wall behind the

 internal unit. Provide a tube so the cable can move

freely. If possible also provide a tube with a

sufficiently large diameter (20-25mm).

 Determine the position of the external unit

outside at the door

. The ideal installation height

is 155 to 165 cm.

 Insert the cable from the external unit to the

internal unit from outside to inside; the cable is

moulded.

 Connect the wiring according to the diagram

below. We again emphasise that the power supply

wiring may not be extended or cut through: this

causes the appliance to work poorly and

invalidates the guarantee.

 Cut off the cables with 2 cores without door lock.

 If a door lock is to be connected, its connection

must be from the outside unit as shown on the

diagram above. The lock may consume no more

than 300 mA and must have a memory function

(the lock remains free until just before the door is

pushed open). The 2 wires are already provided in

a moulded cable (4m)

2. If there is already wiring present (max. 25m):

 The wire diameter must be between 0.6 and 0.8

mm². Only 3 wires have to be connected. The

yellow video connection is not used so does not

have to be connected.

 Shorten the moulded cables to the desired length

and strip the wires approximately 1cm. If an

electrical door lock is used: also strip the 2-core

cable over a length of 1cm.

The door lock is connected from the external unit

with the moulded cable with two wires. The lock

may consume no more than 300 mA and must

have a memory function (the lock remains in a free

position as long as the door is not pushed open).

 Provide a recess behind the external unit in the

wall or door frames, connect the wiring using the

connecting blocks and push this into the recess. If

you cannot do this the wires must be twisted

together and insulated with insulation tape.

Use:

A. Having a normal conversation

1. Ringing on the external unit

2. Take the receiver and speak to the visitor.

Outdoor

unit

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Profile PAC-206 Classic Parlofoon Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Profile PAC-206 Classic Parlofoon

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info