Bedienungsanleitung Profile PCF-218 (Seite 1 von 2) (Englisch)

566785

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

DIGITAL TIME SWITCH EN - 1

PCF-218

We thank you for the purchase of this Profile product.

Note: It is important that you read this manual carefully

before using the product Then keep this manual in a safe

place.

Note

 Check that the voltage in-house corresponds to the

information on the type plate.

 Do not expose the appliance to extremely high or low

temperatures.

 Avoid contact with water.

 For the activation of set programs the switch must be set

AUTO.

Technical information

 Working voltage: 230V (50Hz) – 250V

 Maximum resistive capacity: 3500W/16A

 Maximum inductive capacity: 2000W

 Programming: periods of min. 60 seconds

 Day/week program

Explanatory terms

 Resistive appliances are appliances that consume the

same current quantity for the whole duration. E.g. lights.

 Inductive appliances, on the other hand, consume much

more current at the start than in normal operation. This

includes coffee-makers, boilers, heating appliances, etc.

 If the inductive appliance exceeds the inductive capacity

of the time switch the appliance may not be connected

to it. if it is the switching contact in the time switch will

prematurely fail. This falls outside the guarantee

conditions.

Rechargeable battery

A rechargeable battery ensures that the set time and all

other settings are saved in the case of a power failure (to a

maximum of 100 hours with a fully charged battery). If the

battery appears to be nearly empty on purchasing, plug the

time switch into the plug socket for 30 minutes before

starting programming.

12- or 24-hour display

You can select either 12-hour or 24-hour display. To switch

between the 12-hour display or 24-hour display press the

CLOCK key for at least 3 seconds.

Setting the time

 Keep the CLOCK key pressed in then press the WEEK

key to set the correct day.

 Keep the CLOCK key pressed then press the HOUR key

to set the correct hour.

 Keep the CLOCK key pressed then press the MIN

key to set the correct minute.

NOTE: If you do not press a key for 30 seconds the

time switch automatically goes back to the normal

operating mode.

ON/OFF switching program

You can set up to 7 programs with the option of

repeating them daily or weekly.

 If you press the PROG key once 1

appears in the

left bottom of the display:

1 indicates the first program, “ON” indicates that the

appliance will switch on at the set time.

 Press the WEEK key repeatedly to set the day(s)

on which the program must activate. You can also

select combinations of days along with separate

weekdays.

 Press the HOUR key to set the hour at which the

program must activate.

 Press the MIN key to set the minute at which the

program must activate.

 Press the PROG key again to set the time at which

the program must switch off.

OFF

appears on the

display. Proceed in the same way.

 Repeat the steps above to set a maximum of 7

programs.

 Always make sure that the time switch is set to

AUTO if you want to activate the programs. Do this

by pressing the

ON/AUTO/OFF key until the

underscore character is above AUTO on the screen.

If the underscore character is above ON the

appliance will work continuously. The switching off

times are then not

active. If the underscore character

is above OFF the appliance will not work.

Insert the plug of the device to be switched in the plug

socket part of the time switch. If the connected

appliance has an “on-off” switch make sure this is “on”.

Deleting a set program

 Press the PROG key 1 to 7 times then press the

RST/RCL key to delete the set time for the program

concerned.

 Press the RST/RCL key again to restore the

program if you have mistakenly deleted it.

NOTE: If you press the RESET key the factory settings

are automatically reset.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Profile PCF-218 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Profile PCF-218

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info