Bedienungsanleitung Profitech RTU5024 (Seite 6 von 12) (Englisch)

791935

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

A Professional GSM 3G M2M products manufacturer

and automation solution provider, since

2005

Page 6 of 11

Ver 1.7 File No.:RTU5024

5. Installation and Settings

Notice:

1. The default Password is 1234.

2. You can program the RTU5024 with SMS commands using your phone. It is safe to do so because in

addition to the fact that other people may not know the number of the SIM inserted in it, we also use a

Password that makes it impossible for others who doesn't know it, to access the system by chance, and

all the action will be recorded.

3. The relay output will change the close or open status by every call in, please note it. Means the first time

call it, it will close the relay to switch on the lock, if the second call in is in the setting time, then the unit

will ignore the setting time, and open the relay, to switch off the lock.

4. Remember that commands must be CAPITAL LETTERS. It is AA not aa, EE not Ee etc. Don't add

spaces or any other character on the SMS commands.

5. The pwd in the command means the password,like 1234 or 5678 if you changed.

6. If the RTU5024 used for gate access only,all you need to do is to change the default password and add

the authorized numbers.

7. If you cannot call to control the RTU5024 or cannot send or receive any SMS message from it.please try

to add + in front of the country code or the phone numbers:

For example:

In China, the country code is 0086The user cell phone number is 13570810254 and has been assigned as

the SMS Alert number, the simcard number in the panel is 13512345678.

Problem 1: Alarm but the user hasn’t received the SMS Alert.

Solution: Please plus the country code while you setup the 13570810254 as SMS Alert number, means setup

008613570810254 instead of the 13570810254.

Problem 2: The user number can receive the SMS Alert message from alarm panel, but the alarm panel can

not receive the commands from the user number.

Solution: Please add country code to the simcard number in the alarm panel. Means send sms commands to

008613512345678 instead of 13512345678.

Solution 3: Use mobile phone A to call mobile phone B, the number displayed on B is which you should set

as the dial number; Use mobile phone A send SMS to mobile phone B, the number displayed on B is which

you should set as the SMS alert number; sometimes you may need to use the 00 to replace the + or use the +

to replace the 00 on front of the country code.

8. Fo security purpose, the RTU5024 will NOT return any SMS if command error,so please make sure and

check the SMS Commands, or add the country code before the telephone number or check the input is

in ENGLISH INPUT METHOD and CAPS LOCK.

9. The SMS commands that you will certainly use in the RTU5024 are the following:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Profitech RTU5024 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Profitech RTU5024

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info