Bedienungsanleitung Progress pas 6100 e (Seite 15 von 36) (Deutsch, Englisch, Holländisch, Französisch)

336367

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

and electronic equipment. By ensuring this

product is disposed of correctly, you will help

prevent potential negative consequences for

the environment and human health, which

could otherwise be caused by inappropriate

waste handling of this product. For more

detailed information about recycling of this

product, please contact your local council,

your household waste disposal service or the

shop where you purchased the product.

Installation Instructions

Safety instructions

Warning! This must be read!

The laws, ordinances, directives and stand-

ards in force in the country of use are to be

followed (safety regulations, proper recycling

in accordance with the regulations, etc.) In-

stallation may only be carried out by a quali-

fied electrician. The minimum distances to

other appliances and units are to be ob-

served. Anti-shock protection must be pro-

vided by the installation, for example drawers

may only be installed with a protective floor

directly underneath the appliance. The cut

surfaces of the worktop are to be protected

against moisture using a suitable sealant.

The sealant seals the appliance to the work

top with no gap. When building in, protect the

underside of the appliance from steam and

moisture, e.g. from a dishwasher or oven.

Avoid installing the appliance next to doors

and under windows. Otherwise hot cook-

ware may be knocked off the rings when

doors and windows are opened.

Warning! Risk of injury from electrical

current.

• The electrical mains terminal is live.

• Make electrical mains terminal free of

voltage.

• Follow connection schematic.

• Observe electrical safety rules.

• Ensure anti-shock protection by in-

stalling correctly.

• The appliance must be connected to

the electrical supply by a qualified

electrician.

Warning! Risk of injury from electrical

current.

• Loose and inappropriate plug and

socket connections can make the ter-

minal overheat.

• Have the clamping connections cor-

rectly installed by a qualified electri-

cian.

• Use strain relief clamp on cable.

• In the event of single-phase or two-

phase connection, the appropriate

mains cable of type H05BB-F Tmax

90°C (or higher) must be used.

• If this appliance’s mains cable is dam-

aged, it must be replaced by a special

cable (type H05BB-F Tmax 90°C; or

higher). The latter is available from the

Customer Care Department

A device must be provided in the electrical

installation which allows the appliance to be

disconnected from the mains at all poles with

a contact opening width of at least 3 mm.

Suitable isolation devices include line pro-

tecting cut-outs, fuses (screw type fuses are

to be removed from the holder), earth leak-

age trips and contractors.

progress 15

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Progress pas 6100 e Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info