638774
15
Zoom out
Zoom in
Vorherige Seite
1/44
Nächste Seite
4. Touch or wait five seconds until the
appliance automatically starts to work.
5. When the set time ends, an acoustic
signal sounds for two minutes. The
symbol flashes.
The appliance deactivates.
6. Touch a sensor field or open the door
to stop the acoustic signal.
Automatic programmes with
weight input
If you set the weight of the meat, the
appliance calculates the roasting time.
1.
Activate the appliance.
2.
Touch
.
3. Touch or to set the weight
programme.
The display shows: the cooking time, the
duration symbol , a default weight, a unit
of measurement (kg, g).
4. Touch
or the settings save
automatically after five seconds.
The appliance activates.
5. You can change the default weight
value with
or . Touch .
6. When the set time ends, an acoustic
signal sounds for two minutes.
flashes.
The appliance deactivates.
7.
Touch a sensor field or open the door
to stop the acoustic signal.
USING THE ACCESSORIES
WARNING! Refer to Safety
chapters.
Core temperature sensor
There are two temperatures to be set: the
oven temperature and the core
temperature.
The core temperature sensor measures the
core temperature of the meat. When the
meat is at the set temperature, the
appliance deactivates.
CAUTION! Only use the core
temperature sensor supplied or
the correct replacement parts.
The core temperature sensor
must stay in the meat and in the
socket during the cooking.
1.
Activate the appliance.
2.
Put the point of the core temperature
sensor (with
on the handle) into the
centre of the meat.
3. Put the plug of the core temperature
sensor into the socket at the front of the
appliance.
The display shows flashing and the
default set core temperature. The
temperature is 60 °C for the first operation,
and the last set value for each subsequent
operation.
When you put the core
temperature sensor into the
socket, you cancel the settings
for the clock functions.
4. Touch or to set the core
temperature.
5. Touch
or the settings save
automatically after 5 seconds.
Progress 15
15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

progress-pcd46100x

Suche zurücksetzen

  • Gibt es eine Taste "Regenerieren" d.h. zum Speisen aufwärmen? Ich werde aus der Bedienungsanleitung nicht schlau. Kann es mir jemand erklären? Herzlichen Dank M.L Eingereicht am 22-10-2018 19:45

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Progress PCD46100X wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Progress PCD46100X

Progress PCD46100X Bedienungsanleitung - Deutsch - 48 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info