- 62 -
2. The whole assembly
Rotate the fasten set out of the standing shaft.
Pull the height adjustment pipe out and tighten back the fasten set.
Link the fan main body and the height adjustment pipe together by the fastening screw and then fix them.
3. Rear grille assembly
Unscrew the blade fastening screw and the guard fastening screw from the motor shaft.
Fix the rear guard onto the two pillars of the motor front shell.
Screw the guard fastening screw tightly in clockwise direction.
4. The assembly of fan blade
Insert fan blade onto shaft ensuring blade fits properly onto clip on shaft.
Tighten blade screw onto shaft. Note: Blade screw should be tightened in anti-clockwise direction.
5. Front grille assembly
Put the front guard against the rear guard and fix with the clamping ring. Make sure the clamping ring is set
properly at the rim of the fan guards.
Tighten the screw on the clamping ring.
OPERATION
Please press the buttons on the control panel or the buttons on the remote control to choose your desired
function. The corresponding LED lights will illuminate accordingly.
1. On/Off function
Press the on/off button to turn on the unit. The unit starts to work under normal mode at speed 2.
2. Speed function
Press the speed button “＋” / “－” to set your desired wind speed 1 / 2 / 3 / 4 from low to high, indicated
with the speed lights illuminating one by one (from left to right).
1
st
LED turns on = 1
st
wind speed;
2
nd
LED turns on = 1
st
wind speed;
3
rd
LED turns on = 2
nd
wind speed;
4
th
LED turns on = 2
nd
wind speed;
5
th
LED turns on = 3
rd
wind speed;
6
th
LED turns on = 3
rd
wind speed;
7
th
LED turns on = 4
th
wind speed;
8
th
LED turns on = 4
th
wind speed.
3. Swing function
Press the swing button to set your desired oscillation mode: left and right / up and down / oval movement.
NOTE: There are two swing buttons on the remote control. One for left and right; one for up and down. If
you would like to select the oval movement, please press both of the two buttons.
4. Mode function
Press the mode button to set your desired working mode: normal / sleep / nature.
1) Under normal mode, you can press the speed button “＋” / “－” to set your desired wind speed 1 / 2 /
3 / 4.
2) Under sleep mode, wind speed changes generally from high to low with short time suspended.
3) Under nature mode, wind speed changes randomly with short time suspended.
5. Timer function
Press the timer button to set your desired working time from 0.5h to 7.5h (increment by 0.5h).
