Description
1. Front guard
2. Retaining nut
3. Fan blade
4. Locking nut
5. Rear guard
6. Motor shaft
7. Motor housing
8. Neck
9. Control box
10. Screw
11. Internal pole
12. Height adjustment ring
13. Outer pole
14. Base
15. Locking lever
16. Remote controller
Base Assembly
1. Unscrew the locking lever from the base.
2. Insert the outer pole into the base then locks it into place by fastening the locking
lever.
3. Slide the internal pole up from the outer pole to the desired height then securely
hold this position by turning the height adjustment ring clockwise.
4. Unscrew the screw of the control box.
5. Insert the internal pole into the control box then fasten the screw to securely
attach the pole to the control box.
Fan Assembly
Rear guard assembly
Unscrew the retaining nut from the motor spindle in a clockwise direction. Unscrew
the locking nut from the fan motor in an anti-clockwise direction. Position the rear
guard onto the motor housing, making sure the handle on the rear guard is upward
above the motor housing. Insert the locking nut and turn in a clockwise direction to
lock the rear guard into position.
3
