Bedienungsanleitung PROmax Ranger Neo Plus (Seite 69 von 276) (Englisch)

791716

Zoom out

Zoom in

Vorherige Seite

1/276

Nächste Seite

Chapter 4: RF SIGNAL TUNING 59 June 2022

icon MK appears). When the Marker is ON at the top right corner a window

pops up with the following data:

•Freq: Frequency where is placed the marker.

•Level: Power level at the frequency where is placed the marker.

•ΔF: Difference of frequency between the marker and the main cursor.

•ΔL: Difference of power level between the marker and the main cursor.

Marker Trace: It allows the user to select the trace to place the marker

on:

•Normal: It places the marker on the spectrum trace in real time.

•Reference: It places the marker on the spectrum reference trace. To make

a spectrum reference use the Reference function.

•Max. Hold: It places the marker on the max. hold trace. To make a

maximum hold trace use the Max. Hold function.

•Min. Hold:It places the marker on the min. hold trace. To make a

minimum hold trace use the Min. Hold function.

Max. Hold:(Off/Permanent/Curtain). It allows the user to display the

current signal with the maximum values measured for each frequency.

The OFF option disables this function. The Curtain option displays the

maximum values in blue for a moment with the current signal. The

Permanent option maintains maximum signal on the screen. This option is

especially useful for detecting sporadic noises.

Min. Hold: (Off/Permanent/Curtain). It allows the user to display the

current signal with the minimum values measured for each frequency. The

OFF option disables this function. The Curtain option displays the

minimum values in green for a moment with the current signal. The

Permanent option maintains minimum signal on the screen. This option is

useful for detecting interferences in TV cable or identify deterministic

interference in analogue and digital channels.

Persistence: When active, the signal is displayed on a coloured

background. The signal prior to current signal persists for a while before

disappearing so the user can see how the signal changes easily.

Detector Type: (PEAK/RMS). It allows the user to select between

maximum PEAK detector or RMS detector. The maximum peak detector is

mainly used for analogue modulated signals, while the RMS option is the

right choice for digital modulated signals. The max PEAK detector is

mostly used for analogue modulated signals, while the RMS is the proper

choice for digital modulations. The maximum peak detector causes the

noise floor to rise, according to the RMS to peak ratio. That same effect

causes digital signals to apparently grow in level when maximum peak

detector is used.

Resolution Bandwidth (RBW): Resolution filters available are: 100 kHz,

200 kHz* and 1000 kHz**. According to filter selected maximum and

minimum span changes (for more details refer to “Spectrum Analyzer

Mode” on page 217).

*. only available for RANGER

Neo

**. only available for RANGER

Neo

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

PROmax Ranger Neo Plus Seite 69

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info