Bedienungsanleitung Protool AGP 230-26 R (Seite 15 von 148) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

490682

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

[1-9] Auxiliary handle

[2-1] Protective cover

[2-2] Protective cover for cutting

[2-3] Suction cover

[2-4] Attachment collar

[2-5] Attachment lever

[2-6] Guide pad

[2-7] Nut

[2-8] Bolt

[3-1] Lower ﬂ ange

[3-2] Grinding disc

[3-3] Clamping nut

[3-4] Quick-action ﬁ xing nut (FASTFIX)

[3-5] Key

Not all of the accessories illustrated or de-

scribed are included as standard delivery.

5 Safety instructions

WARNING!

Read all instructions. Failure to follow all

instructions listed below may result in elec-

tric shock, ﬁ re and/or serious injury. The

term “power tool” in all of the warnings

listed below refers to your mains-operated

(corded) power tool or battery-operated

(cordless) power tool.

SAVE THESE INSTRUCTIONS

5.1 Safety instructions for all

work activities

Safety warnings common for work

activities of grinding, surface grind-

ing, wire brush grinding or abrasive

cutting

a) This electromechanical tool is de-

signed to be used as a grinder, sur-

face grinder, wire brush grinder or as

a cutting tool. Read all safety warn-

ings, instructions, illustrations and

speciﬁ cations given for this electro-

mechanical tool. Not adhering to the

instructions below may result in injury

by electric shock, ﬁ re and/or serious in-

jury.

b) It is not recommended to use this

tool to carry out polishing work. Car-

rying out work activities for which this

tool was not designed may create a risk

and cause injury to a person.

c) Do not use accessories, which are

not explicitly designed and recom-

mended by the tool manufacturer.

The mere fact that accessories can be

connected to your tool, does not guar-

antee its safe operation.

d) The nominal revolutions of the ac-

cessory must at least equal the max-

imum revolutions stated on the tool.

Accessories working at higher revolutions

than the nominal revolutions may break

and fall apart.

e) The outside diameter and thickness

of your accessory must be within the

range of the nominal range of your

electromechanical tool. An accessory

that has the wrong size cannot be suf-

ﬁ ciently protected or controlled.

f) The mounting dimensions of discs,

ﬂ anges, support plates or all other

accessories must be suitable for

mounting on the tool’s spindle. Acces-

sories with attachment openings, which

do not conform to the attachment open-

ings of the electromechanical tool will be

unbalanced, may vibrate excessively and

may cause loss of control.

g) Do not use damaged accessories. Be-

fore each use inspect the accesso-

ries: with a grinding wheel chipping

off and cracks, with support under-

lays cracks, rips or excessive wear,

with wire brushes loose or cracked

wires. If the accessory or tool was

dropped, inspect for damage or at-

tach an undamaged accessory. After

inspecting and attaching the acces-

sory both you and those standing

around you stand so that you are

outside the plane of the rotating ac-

cessory and allow the tool to run at

the highest revolutions unloaded for

a period of one minute. During this

test period damaged accessories usually

break or fall apart.

h) Use personal protective gear. De-

pending on the application, use a

face guard plate, safety goggles or

safety glasses. In the appropriate

extent use a dust face mask, hearing

protection, gloves and a work apron,

capable of stopping small frag-

ments of abrasive or pieces of work.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Protool AGP 230-26 R Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info