Bedienungsanleitung Protool BSP 120E (Seite 18 von 110) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

490610

Zoom out

Zoom in

Vorherige Seite

1/110

Nächste Seite

10.4 Festool CMS

By fitting the jigsaws in the Festool Systems

CMS you end up with a semi-stationary

bench-mounted saw for profile cuts. Further

information can be fond in the CMS brochure.

Power tools, accessories and packaging

should be sorted for environmental-friendly

recycling.

Only for EC countries:

Do not dispose of power tools into

household waste!

According to the European Directive 2002/

96/EC on waste electrical and electronic

equipment and its incorporation into national

law, power tools that are no longer suitable

for use must be separately collected and sent

for recovery in an environmental-friendly

manner.

REACh for Protool products, its accesso-

ries and consumable materials:

REACh is a European Chemical Directive that

came into effect in 2007. As "downstream

users" and product manufacturers, we are

aware of our duty to provide our customers

with information. We have set up the follow-

ing website to keep you updated with all the

latest news and provide you with information

on all the materials used in our existing prod-

ucts:

www.protool-online.com/reach

We offer a warranty for material and produc-

tion defects for all our tools in accordance

with the locally applicable legal provisions,

but for a minimum of 12 months. Within the

EU member states, the warranty period is 24

months (verification through invoice or deliv-

ery note). Damage caused by the operator,

natural wear, overloading, incorrect handling

or through the use of the equipment not

specified in the operating manual, or damage

which was known at the time of purchase, is

not covered by the warranty. Furthermore,

damage caused by the use of non-original

accessories and consumable materials (e.g.

sanding pads) is also excluded.

Complaints can only be accepted if the tool is

returned while still assembled to the supplier

or an authorised Protool Customer Service

workshop. Keep the operating manual, safe-

ty instructions, spare parts list and purchase

receipt in a safe place. Otherwise the current

warranty conditions of the manufacturer

shall apply.

Note

Due to continuous research and develop-

ment work, we reserve the right to make

changes to the technical content of this doc-

umentation.

We declare under our sole responsibility that

this product is in conformity with the follow-

ing standards or standardization documents:

EN 60745-1, EN 60745-2-11, EN 55014-1,

EN 55014-2, EN 61000-3-2, EN 61000-3-3,

EN 50366 according to the provision of the

regulations stipulated in Directive 2006/42/

EC, 2004/108/EC.

All the procedures were applied as validly

amended at the time of the issue of this dec-

laration, without quoting these.

Technical documentation is kept at the man-

ufacturer.

Stanislav Jakeš

Research, Development and Technical Docu-

mentation

Protool GmbH

Wertstr. 20

D-73240 Wendlingen

26.04.2010

11 Environmental Protection/

Disposal

12 Warranty

13 EU Declaration of Confor-

mity

Jigsaw Serial no.

JSP 120 497598

JSP 120 E 497500

BSP 120 E 497597

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Protool BSP 120E Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info