Bedienungsanleitung Protool CSP 55-2 (Seite 12 von 110) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

110274

Zoom out

Zoom in

Vorherige Seite

1/110

Nächste Seite

4 Intended Use

The machine is intended for cutting wood

lengthways and crossways in straight lines

and at mitred angles of up to 45° on a ﬁ rm

surface.

The user alone is responsible for any liabili-

ties caused by usage other than intended.

5 Notes on Safety

Prevention

DANGER

5.1 General Safety Instructions

- Before using the machine, carefully read

all safety instructions and the Operating

Instructions.

- Keep all of the attached documents and

pass on the documentation if the ma-

chine changes ownership.

5.2 Safety Rules for Circular

Saws

a) Keep hands away from the cutting

area and the saw blade. Keep your

second hand on the auxiliary handle

or the motor housing. If both hands

are holding the circular saw, they can not

be cut by the saw blade.

b) Do not reach underneath the work.

The blade guard can not protect you from

the saw blade below the work.

c) Adjust the depth-of-cut to the thick-

ness of the work. It should not be vis-

ible below the work by more than the

height of a full tooth.

d) Never hold the workpiece being cut

in your hand or across your leg. Se-

cure the work on a ﬁ rm support. It is

important to secure the work properly to

minimize the danger of body exposure,

blade binding or loss of control.

e) Hold the power tool only by the in-

sulated gripping surfaces when per-

forming an operation where the cut-

ting tool may run into hidden wiring

or its own cord. Contact with a “live”

wire will also make exposed metal parts

of the tool “live” and shock the operator.

f) Always use a ripping guide or straight

edge guide for length cuts. This im-

proves the precision of the cut and re-

duces the possibility of blade binding.

g) Always use saw blades with the cor-

rect size and the matching arbour

shape (diamond or round). Blades

that do not match the mounting hard-

ware of the saw will run eccentrically,

causing loss of control.

h) Never use damaged or incorrect blade

washers or screws. The blade washers

and screws were specially designed for

your saw for optimum performance and

safety of operation.

5.3 Additional Safety Rules

for all Circular Saws

Cause and operator prevention of kick-

back:

- Kickback is a sudden reaction to a pinched,

bound or misaligned saw blade, causing

an uncontrolled saw to lift up and out of

the workpiece toward the operator;

- When the blade is pinched or bound tight-

ly by the kerf closing down, the blade

stalls and the motor reaction drives the

unit rapidly back toward the operator;

- If the blade becomes twinsted or mis-

aligned in the cut, the teeth at the back

edge of the blade can dig into the top

surface of the wood causing the blade

to climb out of the kerf and jump back

toward the operator.

Kickback is the result of saw misuse

and/or incorrect operating procedures

or conditions and can be avoided by tak-

ing proper precautions as given below.

a) Maintain a ﬁ rm grip with both hands

on the saw and position your arms to

resist kickback forces. Position your

body to either side of the blade, but

not in line with the blade. Kickback

could cause the saw to jump backwards,

but kickback forces can be controlled by

the operator, if proper precautions are

taken.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Protool CSP 55-2 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info