Bedienungsanleitung Protool DRC 12-4 TEC LI (Seite 17 von 104) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

79301

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

may apply when several battery packs are trans-

ported, in which case you may have to fulﬁ l special

conditions. Refer to ADR special regulation 230 for

more information relevant for the EU.

11 Accessories

Use only original PROTOOL accessories and

PROTOOL consumable material intended for this

machine because these components are designed

speciﬁ cally for the machine.

Using accessories and consumable material from

other suppliers will most likely affect the quality of

your working results and limit any warranty claims.

Machine wear or your own personal workload may

increase depending on the application. Protect

yourself and your machine, and preserve your war-

ranty claims by always using original PROTOOL

accessories and PROTOOL consumable material!

12 Disposal

Return used or faulty battery packs to your local

specialist retailer, PROTOOL after-sales service or a

designated public waste management facility. The

battery packs will then be recycled.

EU only: European Directive 2006/66/EC stipu-

lates that faulty or used battery packs/batteries

must be recycled.

Do not throw the power tool in your household

waste! Dispose of machines, accessories and pack-

aging at an environmentally responsible recycling

centre. Observe the valid national regulations.

EU only: European Directive 2002/96/EC stipulates

that used electric power tools must be collected

separately and disposed of at an environmentally

responsible recycling centre.

REACh

REACh is a European Chemical Directive that

came into effect in 2007. As “downstream users”

and product manufacturers, we are aware of our

duty to provide our customers with information.

We have set up the following website to keep you

updated with all the latest news and provide you

with information on all the materials used in our

existing products:

http://www.tts-protool.com/reach

13 Warranty

For our tools, we give warranty for material and

production defects in accordance with the locally

applicable legal provisions, but in any case for at

least 12 months. Within the EU member states, the

warranty period is 24 months (veriﬁ cation through

invoice or delivery note).

Damage caused by, in particular, natural wear,

overloading, incorrect handling, or damage caused

by the operator, or damage caused through use of

the equipment contrary that speciﬁ ed in the Oper-

ating Instructions, or damage which was known at

the time of purchase, is not covered by the war-

ranty. Furthermore, damage caused by the use of

non-original PROTOOL accessories and consumable

material (e.g. sanding pads) is also excluded.

Complaints can only be recognised if the tool is

returned while still assembled to the supplier or an

authorised PROTOOL Customer Service workshop.

Keep the Operating Instructions, Safety Instruc-

tions, Spare Parts List and purchase receipt in a

safe place. Otherwise the respective, current war-

ranty conditions of the manufacturer shall apply.

Note

Due to continuous research and development work,

we reserve the right to make changes to the tech-

nical content of this documentation.

14 EU Declaration of

Conformity

Cordless drill Serial no.

DRC 12-4 TEC 496851

DRC 18-4 TEC 496853

We declare under our sole responsibility that this

product is in conformity with the following stand-

ards or standardization documents:

EN 55 014-1, EN 55 014-2, EN 60 745-1,

EN 60 745-2-1, EN 60 745-2-2, EN 61 000-3-2,

EN 61 000-3-3, EN 50 366 according to the pro-

vision of the regulations stipulated in Directive

2006/42/EC, 2004/108/EC, 2011/65/EU (from

01.01.2013).

Charger Serial no.

BC 3 494945

We declare under our sole responsibility that this

product is in conformity with the following stand-

ards or standardization documents:

EN 60 335-1, EN 60 335-2-29, EN 61 000-3-2,

EN 61 000-3-3, EN 61 204-3 according to the provision

of the regulations stipulated in Directive 2006/95/EC,

2004/108/EC, 2011/65/EU (from 01.01.2013).

All the procedures were applied as validly amended

at the time of the issue of this declaration, without

quoting these.

Technical documentation is kept at the manufac-

turer.

Stanislav Jakeš

Research and development

Protool GmbH

Wertstr. 20

D-73240 Wendlingen

12.12. 2011

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Protool DRC 12-4 TEC LI Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info