Bedienungsanleitung Protool ISP 330 EB (Seite 21 von 182) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

490698

Zoom out

Zoom in

Vorherige Seite

1/182

Nächste Seite

- For cutting insulation only. Do not use the

insulation saw for any purpose other than

its intended use. For example: do not use

the saw to cut wood, plastics or masonry.

Any use of the insulation saw for purposes other

than those described in this manual may cause

a hazardous situation.

- Hold the power tools on insulated gripping

surfaces only, because the saw chain can

come into contact with hidden power lines

or with its own power cord. Touching the

saw chain with a “live” electrical conductor may

cause the exposed metal parts of the electrome-

chanical tool to become “live” and lead to injury

of the user by electric shock.

- We recommend using a residual-current device

with actuating current of 30 mA or less.

- Carry the chain saw by the front handle

with the chain saw switched off and away

from your body. When transporting or stor-

ing the chain saw always ﬁ t the guide bar

cover. Proper handling of the chain saw will

reduce the likelihood of accidental contact with

the moving saw chain.

Causes of kickback and how to avoid them:

Kickback may occur when the nose or the tip of the

guide bar touches an object or when the saw chain

jams while cutting. In some cases a touch to the

tip may cause instant kickback, throwing the guide

bar upward and back toward the user. Gripping the

saw chain along the tip of the guide bar may pull

the guide bar back toward the user. Each of these

reactions can cause loss of control over the saw

and may lead to serious bodily injury. Do not rely

exclusively on the safety devices built into your

insulation saw. As a insulation saw user, you must

take multiple precautions to perform your cutting

operations without accident or injury. Kickback is

caused by improper use of the tool or incorrect

working methods or conditions, and can be avoided

by properly following the instructions below:

- Hold ﬁ rmly with your thumbs and ﬁ ngers

around the insulation saw grip, with both

hands on the saw, and position your body

and arms for resistance to kickback. Kick-

back can be controlled by the user, provided all

relevant safety measures are followed. Do not

let go of the chain saw.

- Do not reach or cut above shoulder height.

This prevents unwanted tip contact, and pro-

vides better control over the insulation saw in

unexpected situations.

- Use only manufacturer-speciﬁ ed replace-

ment bars and chains. Any unsuitable re-

placement bars and chains may cause kickback

or chain breakage.

- Follow the manufacturer’s instructions for

sharpening and maintenance of the saw

chain. A drop in the depth gauge might lead to

increased kickback.

5 Safety instructions

DANGER

All applicable rules concerning work safety, the

safety guidelines stated in the chapter Safety In-

structions, and all other generally applicable health

and work principles must be adhered to without

exception. The manufacturer is not liable for any

damages caused by unauthorised alterations to

this machine.

5.1 General safety instructions

- Before using the machine, carefully and thor-

oughly read the attached safety instructions and

this user manual.

- Save all included documents and never pro-

vide the machine to others without these docu-

ments.

5.2 Insulation saw ISP 330 EB

– safety information

- Keep all parts of your body clear of the

saw chain when the machine is turned on.

Before turning on the insulation saw, make

sure the chain is not touching anything. A

second’s distraction when the insulation saw is

on may cause your clothes or body get caught

in the saw chain.

- Always hold the chain saw with your right

hand on the rear handle and your left

handon the front handle. Holding the chain

saw with a reversed hand conﬁ guration increas-

es the risk of personal injury and should never

be done.

- Use eye and ear protection. Use of addi-

tional protective equipment for the head,

hands, legs and feet is recommended. Ad-

equate protective clothing reduces the risk of

bodily injury from ﬂ ying particles or through

accidental contact with the saw chain.

- Do not use the insulation saw in a tree.

Using the insulation saw in a tree may lead to

bodily injury. The machine is not designed for

such use.

- Always stand in the correct position and

work with the insulation saw only if you

are on a solid, safe, even surface. Any slip-

pery or unstable surfaces, such as ladders, etc.,

might cause loss of balance or control over the

insulation saw.

- Carry the insulation saw with the guide bar

away from your body and the safety cover

mounted.

- Follow the instructions for lubrication,

chain tension and component replacement.

An incorrectly tightened or greased chain may

break or increase the risk of kickback.

- Keep the grips dry, clean and clear of oil

and grease. Greasy or oily handles are slippery

and may cause loss of control.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Protool ISP 330 EB Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info