Bedienungsanleitung Protool MXP 1000 (Seite 11 von 88) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

490691

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

5 Safety instructions

WARNING!

All applicable legal requirements concerning oc-

cupational safety must be adhered to, along with

the safety instructions that are cited in the section

“Safety instructions” and all other generally ap-

plicable health and working principles. The manu-

facturer accepts no liability for any damage that is

caused by unauthorised changes to the machine.

5.1 General safety instructions

- Before starting up the machine, read the pro-

vided safety instructions and operating instruc-

tions carefully and completely.

- You must keep all supplied documents and must

only pass the machine onto other people if you

also pass on these documents.

5.2 Safety warnings

- You must also adhere to any other safety in-

structions that are supplied as part of the scope

of delivery of each machine.

- Before starting up any tool, you must check the

ﬂ exible power cable and the plug. You must have

any defects ﬁ xed by a professional.

- Never touch the machine with wet hands when

it is connected to the power mains.

- The switch must be in the OFF position before

you connect it to the mains.

- The container with the material that is to be

mixed must be stabilised to prevent it from slip-

ping on the ﬂ oor.

- Only use the tool until the stirring rod diameter

that is speciﬁ ed in the technical speciﬁ cations

has been reached.

- Load the machine in such a way that the speed

does not decrease too much or the machine is

forced to stop.

- Always guide the ﬂ exible power cable from the

tool to the rear. Never pull hard on the ﬂ exible

power cable and never set it on or guide it over

any sharp edges.

- Only work in a safe and stable position.

- Take into account that there will be a reactionary

torsional momentum.

5.3 Other safety risks

Even in cases where the machine is used correctly

and all relevant safety instructions have been ad-

hered to, the design engineering of the machine

and its operation mean that there may also be the

following safety risks:

- Danger that may be caused by the ﬂ exible power

cable.

- A concentration of dust which is harmful to

health when working in an area that is not suf-

ﬁ ciently ventilated.

- Injuries caused by touching electriﬁ ed parts

when removing the machine or its parts if the

plugs on the ﬂ exible power cable have not been

removed from the socket.

- You must only use original PROTOOL spare

parts.

5.4 Information about noise and

vibrations

Levels determined in accordance with EN 60 745

are typically:

MXP 1000 E EF, MXP 1200 E EF

Sound pressure level L

= 86 dB (A)

Noise level L

= 97 dB (A)

Uncertainty K = 1.5 dB

MXP 1002 E EF

Sound pressure level L

= 86 dB (A)

Noise level L

= 97 dB (A)

Uncertainty K = 1.5 dB

CAUTION

Operating noise

Damage to hearing

► Use ear protection!

Vibration emission value a

(vector sum for three

directions) and uncertainty K measured in accord-

ance with EN 60 745:

MXP 1000 E EF, MXP 1200 E EF a

= 1.0 m/s

Uncertainty K = 0.5 m/s

MXP 1002 E EF a

= 1.0 m/s

Uncertainty K = 0.5 m/s

Declared total value of vibrations was measured

according to standard measure method and can

be used for comparison one powertools with the

others.

Declared total value of vibrations can be used for

preliminary setting of exposition.

Warning:

Emission of vibrations during real operating can

be different from declared total value of vibrations

depending on speciﬁ c real conditions.

To protect operating person shell be provide safety

measurement, that evaluate the exposition un-

der the real conditions (here are included all parts

of operating cycle, switch of mode and idle run

mode).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Protool MXP 1000 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info