Bedienungsanleitung Protool VCP 480E-L (Seite 21 von 132) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

490620

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

9.1 Changing the ﬁ lter element

NOTE

Motor damage

Never operate the extractor without a ﬁ l-

ter element ﬁ tted as the motor may be-

come damaged.

Open the locking clips [2-2] and remove the

top section of the machine [2-1].

Turn the top section of the machine so that

the main ﬁ lter is facing upwards (Fig. [7]).

Fold over the lever [7-3] and remove the

retainer [7-2].

Remove the used main ﬁ lter and replace

[7-1] with a new one.

Dispose of the used ﬁ lter in accordance with

statutory regulations.

Remove any dust which has fallen behind

the main ﬁ lter when it is replaced.

Insert the retainer [7-2] and fold over the

lever [7-3] until it engages.

Replace the top section [2-1] and close the

locking clips [1-11].

9.2 Emptying the dust container

The dust container [2-3] can be emptied

once the top section has been removed.

► After extracting ﬂ uids, clean the ﬁ ll level

sensors [9-1] regularly with a soft cloth

and inspect for damage.

10 Accessories

Use only original PROTOOL accessories and

PROTOOL consumable material intended for

this machine because these components

are designed speciﬁ cally for the machine.

Using accessories and consumable mate-

rial from other suppliers will most likely af-

fect the quality of your working results and

limit any warranty claims. Machine wear or

your own personal workload may increase

depending on the application. Protect your-

self and your machine, and preserve your

warranty claims by always using original

PROTOOL accessories and PROTOOL con-

sumable material!

The order numbers for the accessories and

ﬁ lters can be found in the PROTOOL catalogue

or on the Internet at “www.protool.com”.

10.1 Module slot

To extend the vacuum cleaner, there are the

following module in the accessory range,

that can be ﬁ tted to the module slot [1-2]

by an authorised customer service work-

shop:

- Socket module with permanent power

supply.

10.2 Systainer depot

The surface of the vacuum cleaner is used

as a systainer parking zone:

The systainer can be hooked easily into the

systainer holder – see ﬁ gure [10 a].

If you wish to ﬁ rmly attach the systainer to

the vacuum cleaner, you must use 4 screws

to fasten a systainer adapter to the upper

section – see ﬁ gure [10 b].

11 Environmental

Protection / Disposal

Power tools, accessories and packaging

should be sorted for environmental-friendly

recycling.

Only for EC countries:

Do not dispose of power tools into

household waste!

According to the European Directive

2002/96/EC on waste electrical and elec-

tronic equipment and its incorporation into

national law, power tools that are no longer

suitable for use must be separately collect-

ed and sent for recovery in an environmen-

tal-friendly manner.

REACh

REACh is a European Chemical Directive

that came into effect in 2007. As “down-

stream users” and product manufacturers,

we are aware of our duty to provide our

customers with information. We have set up

the following website to keep you updated

with all the latest news and provide you

with information on all the materials used

in our existing products:

http://www.tts-protool.com/reach

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Protool VCP 480E-L Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info