Bedienungsanleitung Proxxon FBS 240-E (Seite 4 von 11) (Englisch)

782202

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

dropped, inspect for damage or install an un-

damaged accessory. After inspecting andin-

stalling an accessory, position yourself and

bystanders away from the plane of the rotating

accessory and runthe power tool at maximum

no-load speed for one minute. Damaged acces-

sorieswill normallybreak apart during this test time.

i) Wear personal protective equipment. Depending

on application, use face shield, safety goggles or

safety glasses. As appropriate, weardust mask,

hearing protectors, gloves and workshop apron

capable of stoppingsmallabrasive or workpiece

fragments. The eyeprotection must be capable of

stopping flying debris generated by various opera-

tions. The dust mask or respirator mustbecapable

of filtrating particles generatedbyyour operation.

Prolonged exposuretohigh intensity noise may

cause hearing loss.

j) Keepbystandersasafe distance away from

work area.Anyone enteringthework areamust

wearpersonal protective equipment. Fragments

of workpiece or of a broken accessory may fly away

and cause injury beyond immediate areaofopera-

tion.

k) Hold power toolbyinsulated grippingsurfaces

only,whenperforming an operation where the

cutting accessory may contacthiddenwiring or

its own cord. Cutting accessorycontactinga“live”

wire may makeexposed metal parts of the power

tool “live” and could give the operatoranelectric

shock.

l) Always holdthetool firmlyinyour hand(s)

duringthestart-up. The reaction torque of the

motor, as it acceleratestofullspeed,cancause the

tooltotwist.

m) Use clamps to supportworkpiece whenever

practical. Never holdasmallworkpiece in one

hand andthetoolintheother handwhileinuse.

Clampingasmall workpiece allowsyoutouseyour

hand(s)tocontrol the tool.Round materialsuchas

dowel rods, pipesortubing have a tendencytoroll

while beingcut, and maycause the bittobindor

jump toward you.

n) Position the cord clearofthespinning acces-

sory. If you lose control, thecordmaybe cutor

snagged andyour handorarmmaybepulled into

thespinning accessory.

o) Never laythepower tooldownuntil the acces-

sory has come to a complete stop. The spinning

accessory may grab thesurface and pull the power

tool outofyour control.

p) Afterchanging the bits or makinganyadjust-

ments, makesurethecollet nut, chuck or any

other adjustmentdevices are securely tight-

ened. Loose adjustment devices can unexpectedly

shift,causing lossofcontrol, looserotating compo-

nents willbeviolently thrown.

q) Do not runthepower toolwhile carryingitat

your side. Accidentalcontactwith the spinning ac-

cessorycould snagyourclothing, pulling the acces-

sory intoyour body.

r) Regularly cleanthepower tool’s air vents. The

motor’s fanwilldrawthe dust inside the housing

and excessive accumulationofpowdered metal may

cause electrical hazards.

s) Do notoperate the power tool near flammable

materials. Sparks could ignite these materials.

t) Do notuseaccessories that require liquid

coolants. Using water or other liquid coolants may

resultinelectrocutionorshock.

Kickback and related warnings

Kickback is a sudden reaction to a pinched or snagged

rotating wheel,sanding band, brush or any other acces-

sory. Pinchingorsnaggingcausesrapid stallingofthe

rotating accessory which in turn causes the uncon-

trolledpower tooltobeforced in the direction opposite

of the accessory’s rotation.

Forexample,ifanabrasive wheelissnaggedorpinched

by the workpiece, the edgeofthe wheel thatisentering

into the pinch point can dig into thesurface of thema-

terial causing the wheeltoclimb outorkickout.The

wheelmayeitherjumptoward or away from the oper-

ator, dependingondirectionofthe wheel’smovement

at the pointofpinching. Abrasive wheels may also break

under theseconditions.

- 12 -

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Proxxon FBS 240-E Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info