Bedienungsanleitung Proxxon FET (Seite 10 von 24) (Englisch)

782211

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

nected to the power source receptacle before chang-

ing any parts or tools (i. e. saw blade)

For your own safety, use only saw blades sized and

recommended for this table saw. Follow the instruc-

tions that accompany the millers.

To avoid fire or toxic reaction, never use gasoline,

naphtha, acetone, lacquer thinner, or similar highly

volatile solvents to clean the table saw.

Do not allow brake fluids, gasoline, or penetrating

oils to come in contact with the plastic parts. They

contain chemicals that can damage or destroy plas-

tics.

When servicing use only PROXXON replacement

parts. Use of any other parts may create a hazard or

cause product damage.

Any attempt to repair or replace electrical parts on

this lathe may create a hazard unless repair is done

by a qualified service technician. Repair service is

available at your PROXXON service center (You find

the address at the back of this manual)

Never work with a device that has faulty or defective

parts. Your table saw might no longer be safe. There-

fore, have any damage immediately repaired by the

Proxxon Customer Service!

WARNING:

Some dust created by power sanding, sawing, grind-

ing, drilling, and other construction activities contains

chemicals known to the State of California to cause

cancer, birth defects or other reproductive harm.

Some examples of these chemicals are:

• lead from lead-based paints,

• crystalline silica from bricks and cement and other

masonry products, and

• arsenic and chromium from chemically-treated

lumber.

Your risk from these exposures varies, depending on

how often you do this type of work. To reduce your

exposure to these chemicals: work in a well venti-

lated area, and work with approved safety equip-

ment, such as those dust masks that are specially

designed to filter out microscopic particles.

Use a vacuum cleaner for wood dust collection as

described in our manual whenever possible.

Grounding instructions:

1. All grounded, cord-connected tools:

In the event of a malfunction or breakdown, ground-

ing provides a path of least resistance for electric

current to reduce the risk of electric shock. This tool

is equipped with an electric cord having an equip-

ment-grounding conductor and a grounding plug.

The plug must be plugged into a matching outlet that

is properly installed and grounded in accordance

with all local codes and ordinances. Do not modify

the plug provided — if it will not fit the outlet, have

the proper outlet installed by a qualified electrician.

Improper connection of the equipment-grounding

conductor can result in a risk of electric shock. The

conductor with insulation having an outer surface

that is green with or without yellow stripes is the

equipment-grounding conductor. If repair or replace-

ment of the electric cord or plug is necessary, do not

connect the equipment-grounding conductor to a

live terminal. Check with a qualified electrician or

service personnel if the grounding instructions are

not completely understood, or if in doubt as to

whether the tool is properly grounded.

Use only 3-wire extension cords that have 3prong

grounding plugs and 3pole receptacles that accept

the tool’s plug.

Repair or replace damaged or worn cord immedi-

ately.

2. Grounded, cord-connected tools intended for use

on a supply circuit having a nominal rating less

than 150 volts:

This tool is intended for use on a circuit that has an

outlet that looks like the one illustrated in Sketch A in

Figure 72.1. The tool has a grounding plug that looks

like the plug illustrated in Sketch A in Figure 72.1. A

temporary adapter, which looks like the adapter illus-

trated in Sketches B and C, may be used to connect

this plug to a 2-pole receptacle as shown in Sketch

B if a properly grounded outlet is not available. The

temporary adapter should be used only until a prop-

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Proxxon FET Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info