Bedienungsanleitung Proxxon MF 70 (Seite 4 von 10) (Englisch)

782207

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

- 4 -

Operating Instructions

Micro Milling Machine MF 70

Dear Customer,

By purchasing your PROXXON Micro Milling Machine

MF 70, you have chosen a good-quality, high-grade

machine. The PROXXON MF 70 MICRO Milling Machine

is equipped with the proven KT 70 microcoordinate

table. This enables you to perform small, precise milling

operations on metal, plastics or wood. In order to

operate the milling machine and the accompanying

accessories safely and correctly, please read the

enclosed safety information and operating instructions

prior to operation.

This instruction manual covers:

• safety regulations

• operation and maintenance

• spare parts list

Please read carefully!

Using this instruction manual will

• make it easier for you to get used to the machine,

• help prevent faults occurring due to improper use and

• increase the service life of your machine.

Keep this instruction manual in an easily accessible place.

Only operate this machine if you are qualified to do so

and follow the guidelines in this instruction manual.

PROXXON does not accept responsibility for the safe

functioning of the machine

• if it is handled in a manner which constitutes improper

use,

• if it is used for other purposes which are not specified

in the instruction manual,

• if the safety regulations are not observed.

Warranty claims are invalid if

• the machine is incorrectly operated,

• the machine has not been sufficiently maintained.

In the interests of your safety, please always observe

the safety regulations.

Only use genuine PROXXON spare parts.

We reserve the right to make further alterations for the

purpose of technical progress.

We wish you every success with your machine.

General safety instructions:

1. REMOVE ADJUSTING KEYS AND WRENCHES. Form

habit of checking to see that keys and adjusting

wrenches are removed from tool before turning it on.

2. KEEP WORK AREA CLEAN. Cluttered areas and

benches invite accidents.

3. DON'T USE IN DANGEROUS ENVIRONMENT. Don't

use power tools in damp or wet locations, or expose

them to rain. Keep work area well lighted.

4. KEEP CHILDREN AWAY. All visitors should be kept

safe distance from work area.

5. MAKE WORKSHOP KID PROOF with padlocks,

master switches, or by removing starter keys.

6. DON'T FORCE TOOL. It will do the job better and

safer at the rate for which it was designed.

7. USE RIGHT TOOL. Don't force tool or attachment

to do a job for which it was not designed.

8. USE PROPER EXTENSION CORD. Make sure your

extension cord is in good condition. When using an

extension cord, be sure to use one heavy enough

to carry the current your product will draw. An

undersized cord will cause a drop in line voltage

resulting in loss of power and overheating. Table 1

shows the correct size to use depending on cord

length and nameplate ampere rating. If in doubt,

use the next heavier gage. The smaller the gage

number, the heavier the cord. Exception No. 1: The

reference to the table and the table itself may be

omitted if a statement indicating the appropriate

gage and length is incorporated into the instruction.

Exception No. 2: The information regarding

extension cords need not be provided for a

permanently connected tool.

9. WEAR PROPER APPAREL. Do not wear loose

clothing, gloves, neckties, rings, bracelets, or other

jewelry which may get caught in moving parts.

Non-slip footwear is recommended. Wear

protective hair covering to contain long hair.

Exception: The reference to gloves may be omitted

from the instructions for a grinder.

10. ALWAYS USE SAFETY GLASSES. Also use face or

dust mask if cutting operation is dusty. Everyday

eyeglasses only have impact resistant lenses, they

are NOT safety glasses.

11. SECURE WORK. Use clamps or a vise to hold work

when practical. It's safer than using your hand and

it frees both hands to operate tool.

12. DON'T OVERREACH. Keep proper footing and

balance at all times.

13. MAINTAIN TOOLS WITH CARE. Keep tools sharp

and clean for best and safest performance. Follow

instructions for lubricating and changing

accessories.

14. DISCONNECT TOOLS before servicing; when

changing accessories, such as blades, bits, cutters,

and the like.

15. REDUCE THE RISK OF UNINTENTIONAL

STARTING. Make sure switch is in off position

before plugging in.

16. USE RECOMMENDED ACCESSORIES. Consult the

owner's manual for recommended accessories. The

use of improper accessories may cause risk of

injury to persons.

17. NEVER STAND ON TOOL. Serious injury could

occur if the tool is tipped or if the cutting tool is

unintentionally contacted.

18. CHECK DAMAGED PARTS. Before further use of

the tool, a guard or other part that is damaged

should be carefully checked to determine that it will

operate properly and perform its intended function -

- check for alignment of moving parts, binding of

moving parts, breakage of parts, mounting, and any

other conditions that may affect its operation.

A guard or other part that is damaged should be

properly repaired or replaced.

19. DIRECTION OF FEED. Feed work into a blade or

cutter against the direction of rotation of the blade

or cutter only.

20. NEVER LEAVE TOOL RUNNING UNATTENDED.

TURN POWER OFF. Don't leave tool until it comes

to a complete stop.

Proxxon MF 70 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Proxxon MF 70

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info